Download Files
File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
File Name: PcoipHostSoftware_x86_x64-v4.0.8_ZPE.exe
File size: 12.41 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: edc679b0b3cee6bd4b06f62f740dcbf4
SHA1: db1d21146711e39f463cc85a4104ee2cd99b9c45
SHA-256: 547dd49a9b6cc1fad17089a9ecbbfa23fa0385358dcefc15caccea1c75171ca3
Important Information
PcoIP host and zero client are loaded with firmware release 2.x, 3.1.x or 3.2.x or later
Host Driver Function is enabled on the host card
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows Vista, 32-bit
Windows Vista, 64-bit
Installation instructions
Note: Before the installation, please ensure the host card is present in the system and the allow enhancement driver option is enabled in management console. Please refer to Teradici User's Guide from https://techsupport.teradici.com
1. Activate the installer by double-clicking on the file.
2. Click "Next" to continue.
3. Click "Yes" to continue.
4. Review the End-User License Agreement (EULA). If you accept the terms, click the "I accept the terms in the License Agreement" checkbox, and then click "Next".
5. To choose a different directory to install the software, specify the path in the text box, or click "Change...".
6. Click "Next" to continue.
7. Click "Install", to start the installation process.
8. Wait for the installation process to finish.
Note: A dialog box may appear while upgrading the host software. This occurs when the installer tries to update files that are currently in use. Click "OK" to continue with the installation. If a reboot is required the installer will display another dialog telling the user to reboot the workstation.
Note: A dialog box may appear to explain the PCoIP host software is not Windows Logo tested. Click "Continue Anyway" to continue with the installation of the drivers.
Note: A Windows Security dialog box may appear during installation. Click "Install" to continue with the installation. You can also check the "Always trust software from Teradici Corporation" check box to avoid seeing this dialog in the future.
9. Click "Finish" to complete the installation.
Note: If a message appears to reboot, click "Yes" to reboot the systems. After Windows reboots, the installer automatically runs to finish the installation.