Download Files
File Format: This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
File Name: M17R4A11WIN.exe
File size: 4.44 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: e11219f91b6b1f461e447f7148bdba15
SHA1: ccbda8ee6392269c53db7ec238cffbaedaeff0ea
SHA-256: 88571a7aee0c93b75a1ab4969ab3d6c3a087db70b3ae5a4aab2051a9099927d5
Fixes & Enhancements
Fixes
-Fixed under setup menu MSATA and ODD show "not detected".
Enhancements
-Not Applicable.
Supported Operating Systems
Windows 7, 64-bit
Windows 8, 64-bit
Installation instructions
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. After BIOS update finished, Windows System will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode Non-Windows users
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select USB Storage Device and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled Non-Windows users
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to Boot > Boot List Option
3. Change UEFI to Legacy of Boot List Option
4. Go to Exit > Exit Save Changes and reboot system.
5. Press F12, then Select USB Storage Device and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to Boot > Boot List Option
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Exit Save Changes and reboot system.
Reboot will be required