Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Latitude_5X10_Precision_3550_1.6.0.exe
File size: 40.96 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: daa72acfd7bc4b7ae505ff520390cc2a
SHA1: a194dbe31c7fd637691790735f6407531615ccc5
SHA-256: 7af227b40a3541e0f197f9cd736cb8a4d067a553ca515fbefbefaf87eed9f1cd
Fixes & Enhancements
- Firmware updates to address the Intel Security Advisory INTEL-SA-00459 (CVE-2020-24507, CVE-2020-8703, CVE-2020-24506, and CVE-2020-24516).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00464 (CVE-2020-24511 and CVE-2020-24512).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00463 (CVE-2020-12359).
- Firmware updates to address security vulnerabilities.
Important Information
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Supported Operating Systems
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update. Download and Installation
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the file.
5. Click Yes to open the BIOS update utility.
6. Click Update to initiate the update process. A progress bar is displayed.
7. Click Restart to restart the system once the progress bar reaches 100%.
The update process initiates at the Dell logo, and an update initiation message is displayed with a progress bar. After the update finishes, the system automatically restarts.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Applies to
Latitude 5410;Latitude 5510;Precision 3550