Dell OptiPlex 3060 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : 2N5M3

Importance : Critical

Version : 1.3.4, 1.3.4 Latest version Recommended version Latest and Recommended version

Release Date : 05 Apr 2019

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update for Dell OptiPlex 3060 Tower, OptiPlex 3060 Small Form Factor and OptiPlex 3060 Micro systems that run Windows operating system. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices. This update addresses the Intel security advisories INTEL-SA-00185 and INTEL-SA-00191. The security advisory is an official statement when a product is impacted by a security vulnerability and a remedy is available. This update fixes the issue where the CPU fan spins too fast when the system boots.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: OptiPlex_3060_1.3.4.exe

File size: 14.41 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: beff28ccdea7c73ea6eb896bd7c461a7

SHA1: 9c74b9af8e1cd1c90dc342e4917ede1cb0c49647

SHA-256: 4de61d5c474bbd650afdb4182ad446be7fe12f19d481347877a0aa0f842f5c70

Download .EXE

Fixes & Enhancements

Fixes:
- Fixed the issue where the CPU fan spins too fast when the system boots.
- Fixed the issue where user cannot configure the mSATA hard drive password using the Dell Command Configure (DCC) application.
- Fixed the issue where PS2 keyboard/mouse cannot wake up system when system in suspend mode.
- Fixed the issue where Secure Boot mode cannot load defaults in BIOS when CMOS is reset in BIOS.
- Fixed the issue with Secure Boot Option ROM Signature Verification.
- Fixed the issue where Windows Hello cannot enroll the fingerprint of Dell MS819 device.
- Firmware updates to address security advisory INTEL-SA-00185 (CVE-2018-12188 CVE-2018-12190 CVE-2018-12191 CVE-2018-12192 CVE-2018-12199 CVE-2018-12198 CVE-2018-12200 CVE-2018-12187 CVE-2018-12196 CVE-2018-12185).
- Firmware updates to address security advisories INTEL-SA-00191(CVE-2018-12201, CVE-2018- 12202, CVE-2018-12203, CVE-2018-12205).

Enhancements:
- Added a warning message to prevent the installation of an operating system that is not supported on the system.
- Added the option Always,Except Internal HDD&PXE in UEFI Boot Path Security feature. This option is added to skip the admin password prompt while booting to internal hard disk drive or Preboot Execution Environment (PXE).
- Added BIOS Setup configuration of Intel(R) Active Management Technology.
- Enhanced USB device compatibility when connected to a USB hub.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a progress bar at the Dell logo screen. The system restarts again when the update is complete.

Dell OptiPlex 3060 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to