Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Latitude_E5x70_Precision_3510_1.11.3.exe
File size: 12.9 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 0b676ee10d4c26f189c506ff8ecb2d0d
SHA1: 01d52b51b23605de5339feb5c16e8d43584ddd0b
SHA-256: f4c6c006a0afb8c2d520a21bf590b083bc4dc29c0ab0f0e760ea0bfffe270aa8
Fixes & Enhancements
Fixes
- Addressed WinMagic PBA issue.
- Fixed Dell legacy E-dock external display issue on Latitude E5470/E5570 and Precision 3510 systems.
- Fixed Microsoft Windows 10 Enterprise OS RS1 black screen issue if Device Guard and Credential Guard are Enabled.
Enhancements
- Upgraded Intel RST OROM.
- Upgraded Intel MEFW.
- Added SMBIOS 3.0 support.
- Updated Intel VBIOS.
- Updated TI PD F/W.
Important Information
Important:
- Not allowed to downgrade BIOS to the version before 1.11.3
Supported Operating Systems
Installation instructions
--------------------------------------------------------------------------------
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required
Applies to
Dell Latitude E5270/E5470/E5570, Precision 3510