Dell PowerEdge T30 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : HFHMN

Importance : Urgent

Version : 1.2.0, 1.2.0 Latest version Recommended version Latest and Recommended version

Release Date : 14 Jan 2020

Download Type : System BIOS

Category : BIOS

This release contains new Intel MEFW. This release contains BIOS firmware version 1.0.15 for Dell PowerEdge T30 running in the following Operating Systems: Windows and DOS.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: PowerEdge_T30_1.2.0.exe

File size: 8.55 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: d43fa817abb0b196fb02a97572c9d67f

SHA1: b7dcab711c790877b2e474ead4b7f475019dd473

SHA-256: c2093f2c06516d1cb9af3ac3b5b5cddd752bcfbc41fe493deaab506e40676cbe

Download .EXE

File Format: This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.

File Name: T30_BIOS.1.2.0_RN.pdf

File size: 120.79 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: b6ffe5bbe3fffea092d8f52b2cf764ee

SHA1: 9d0f823211884ca716c2061ce695fa6da9e440f1

SHA-256: 8bb2d7d404de78bbeb882e573f67e8e8de6ba3324acc7915de981d654d4d8125

Download .PDF

Fixes & Enhancements

Fixes
- Fixed a BIOS Setup configuration issue that occurs after clearing the Complementary metal oxide semiconductor (CMOS).

Enhancements:
- Firmware updates to address the Intel Security Advisories INTEL-SA-00219(CVE-2019-0117), INTEL-SA-00220(CVE-2019-0123), INTEL-SA(CVE-2019-0123), INTEL-SA-00260(CVE-2019-0154), and NTEL-SA-00270(CVE-2019-11135).
- Updated Intel Manageability Engine Firmware to 11.8.70.3626.
- Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0xD4.

Installation instructions

BIOS Update Executable for Windows/DOS

Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.

Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
--------------------------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.

Dell PowerEdge T30 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to