Skip to main content

Dell Networking N2000 Series, Firmware Version 6.3.3.8

Driver Id : 2T64D
Importance : Recommended
Version : 6.3.3.8, A29 Latest version Recommended version Latest and Recommended version
Release Date : 11 Sept 2017
Download Type : Firmware
Category : Network, Ethernet & Wireless
Both Dell Networking N2000 and N3000 Series switches share the same firmware image file (N3000_N2000v6.3.3.8.stk). If your N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware 6.3.3.8 as it contains multiple bug fixes.

New CPLD version 15 is available in release 6.3.2.3 and later for both N3000 and N2000 Series switches. After upgrading the switches to FW version 6.3.2.3 and later, the CPLD can be updated to version 15 from CLI using the command - update cpld. To update CPLD on stack members, run - 'devshell cpldUpdate' command from serial console. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, it's required to do manual switch power-cycle. Verify CPLD Version with the command - 'show version' from CLI after power-cycle.

****Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.3.3.8 and CPLD Version 15 and attempt to downgrade to any prior FW version****

Downgrading N3000 and N2000 Series switches from firmware version 6.3.3.8 with the updated CPLD version 15 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.

With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.3.3.8 Firmware" procedure.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.3.8_Release_Notes".

Download Files

File Format: This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
File Name: N2000v6.3.3.8a29.zip
File size: 57.45 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: c55c33bcf6526a0a99b3af902908f7e4
SHA1: 13348d22ef9e3ceb3fe7ae6bb490418d64685848
SHA-256: 8d6b62f7cc58bdd40eaafdf68be151e5e6a111fe09d99e5e316b35466be4df6d
Download .ZIP
File Format: This file format contains plain text which can be viewed with a standard text editor.
File Name: N2000ReadMev6.3.3.8a29.txt
File size: 3.16 KB
To ensure the integrity of your download, please verify the checksum value.
MD5: d2b27f2fd449865097bb74bdc2f08a6c
SHA1: 35aa483dad96f160bbdad11f548bfbe12e91e922
SHA-256: 557c5c7961844b1a7730ed3bbfa266ccc3ecef621ca2ac348326dee5da1e76a6
Download .TXT