Dell PowerVault 136T Tape Library, v.SNC2, A04

Dell recommends that you reboot the host system connected to the PowerVault 136T after installing the device drivers.

Custom Instructions for R69046.EXE:


Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.

Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Click Continue.
3. Specify the location to upzip the files (the default location is x:\dell\drivers\R69046).
4. Click on the OK button to extract files.
5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.

Installation
1. Locate the readme.htm file in the directory to which you unzipped the files. This file contains the installation instructions for the files listed below:

PowerVault 136T Windows 2000 and Windows Server 2003 Device Drivers;
PowerVault 136T LTO Tape Drive Windows NT, Windows 2000, and Windows Server 2003 Device Drivers;
PowerVault 136T SDLT Tape Drive Windows NT, Windows 2000, and Windows Server 2003 Device Drivers;
PowerVault 136T LTO2 Tape Drive Windows 2000 and Windows Server 2003 Device Drivers;
PowerVault 136T SNC Module Windows 2000 and Windows Server 2003 Dummy Driver