Dell PowerConnect M8024-K, Firmware Version 5.1.4.5,A14
Es necesario reiniciar.InstaladoSe ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.4.5_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.4.5 Firmware.pdf".
Recomendado
Comprobar compatibilidad
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistema
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto.¿Cómo lo hago?
No se han encontrado resultados.No hemos encontrado ningún resultado para la búsqueda. Modifica la búsqueda con una etiqueta de servicio (B959FS3) o un modelo (Latitude 5540) e inténtalo de nuevo.
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema.Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
Fixes available in this release:
CaseID Summary 772696 DNSE - 5.1.3.7 - PC7024P Power negotiation fails with Cisco 9971 IP Phone 697710 PC81xx v5.1.1.7 Unable to restore config via GUI - 6248 - unable to restore config via http 735779 UNH - IPv6 - 5.1.1.7 - Duplicate Address Detection issue 755551 BSR action shutdown functionality is not working. 747017 PC8024 v5.1.2.3 cpldTest command reports a fan control error 755368 DNSE - 5.1.3.7 - show tech-support output is incomplete and overwritten by "show arp" entries. 755422 DNSE - 5.1.3.7 - Error reported when generating 2nd self-signed certificate from CLI 755550 PC8132f - Vlan 230 is down with physical interfaces associated for that vlan is up 755891 Show mac address-table command is crashing the switches 762521 DNSE - 5.0.1.3 - Mellanox ConnectX-3 Mezz card fails to link with M8024-k 759809 DNSE - 5.1.3.7 - ICMP Redirect status of VLAN is enabled when "no ip redirects" applied globally 746010 PC81xx v5.1.2.3 error reported when importing a certificate via GUI 774761 Unwanted print and error log is seen when we configure ip address on loop back interface. 779021 Image and Config download using HTTP through HTTP session is failing in all the platforms except PC8100 series. 777664 warning message is not shown when ports of different speed are added in port-channel using interface range command. 779687 Error message is shown though SSL certificate import is successful via GUI in pop-up window. 697710 PC81xx v5.1.1.7 Unable to restore config via GUI 781003 DNSE - PC8100 Stack - ipMapProcessingTask crash 697710 PC81xx v5.1.1.7 Unable to restore config via GUI 781102 Update WRL kernel binary with the XLP unaligned access patch for NetLogic processors
Enhancements available in this release:
CaseID Summary 687354 NTP to support RFC4330 683992 Add storm control action support for broadcast and multicast streams 770272 Add "show running-config interface all" command
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización recoge cambios para mantener el estado general del sistema. Garantiza que el software del sistema esté actualizado y que sea compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formato de archivo:Extrae archivos directamente al disco local
Nombre de archivo:PCM8024kv5.1.4.5a14.zip
Tamaño de archivo:12.21 MB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este formato de archivo se compone de un fichero de archivos que se pueden descomprimir en un directorio del disco duro. La instalación se puede realizar desde ese directorio.
CaseID Summary 772696 DNSE - 5.1.3.7 - PC7024P Power negotiation fails with Cisco 9971 IP Phone 697710 PC81xx v5.1.1.7 Unable to restore config via GUI - 6248 - unable to restore config via http 735779 UNH - IPv6 - 5.1.1.7 - Duplicate Address Detection issue 755551 BSR action shutdown functionality is not working. 747017 PC8024 v5.1.2.3 cpldTest command reports a fan control error 755368 DNSE - 5.1.3.7 - show tech-support output is incomplete and overwritten by "show arp" entries. 755422 DNSE - 5.1.3.7 - Error reported when generating 2nd self-signed certificate from CLI 755550 PC8132f - Vlan 230 is down with physical interfaces associated for that vlan is up 755891 Show mac address-table command is crashing the switches 762521 DNSE - 5.0.1.3 - Mellanox ConnectX-3 Mezz card fails to link with M8024-k 759809 DNSE - 5.1.3.7 - ICMP Redirect status of VLAN is enabled when "no ip redirects" applied globally 746010 PC81xx v5.1.2.3 error reported when importing a certificate via GUI 774761 Unwanted print and error log is seen when we configure ip address on loop back interface. 779021 Image and Config download using HTTP through HTTP session is failing in all the platforms except PC8100 series. 777664 warning message is not shown when ports of different speed are added in port-channel using interface range command. 779687 Error message is shown though SSL certificate import is successful via GUI in pop-up window. 697710 PC81xx v5.1.1.7 Unable to restore config via GUI 781003 DNSE - PC8100 Stack - ipMapProcessingTask crash 697710 PC81xx v5.1.1.7 Unable to restore config via GUI 781102 Update WRL kernel binary with the XLP unaligned access patch for NetLogic processors
Enhancements available in this release:
CaseID Summary 687354 NTP to support RFC4330 683992 Add storm control action support for broadcast and multicast streams 770272 Add "show running-config interface all" command
(1) Download the zip file - PCM8024kv5.1.4.5a14.zip (2) Extract the image file "PCM8024kv5.1.4.5.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.4.5 Firmware.pdf" extracted from zip file.
¿Necesita ayuda para solucionar problemas de conexión de red?
Consulta la guía de solución de problemas de red de Dell