Dell Systems Management Tools and Documentation DVD ISO, v8.3
Es necesario reiniciar. Instalado Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
The Dell Systems Management Tools and Documentation DVD provides a consolidated toolset for managing Dell systems through the entire system lifecycle: deployment, monitoring and update. This DVD includes: Dell Systems Build and Update Utility, the OpenManage Server Administrator agent, Systems Service and Diagnostics Tools and Systems Documentation. The Full ISO is located below. If you download the Full ISO - It is recommended to utilize the Dell Download Manager
Recomendado
Comprobar compatibilidad
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistemaIntroduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto. ¿Cómo lo hago?
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema. Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
Fixes:
The following problems are reported in earlier releases of Server Administrator and have been corrected in this release:
- Connection service crash in Windows OS after enabling/disabling session timeout in OMSA.
- PCIeSSD Drives are showing up in the OMSA slots view instead of the Brdige Card.
- NIC and TEAMED NIC association corrected.
- Add attacheement failure fixed on Safari 8.0
- Mellanox card doesnt display all the interface names (ports) in OMSA after we reboot server.
- Omacs crash if new network interfaces appear.
- Broadcom NXII duplicate nic info is showing in OMSA gui after flashing the driver.
- Command log message is not generated for SSL Protocol setting in GUI.
- OMSA reporting Degraded for Unknown Reason status under Hardware Performance.
- OMSA spawning kipmi0 thread even on 12G/13G where IPMI should use interrupts.
- NVMe:Slot occupancy report was displaying single backplane ID and backplane name in GUI and CLI.
- Concatenated option is observed in RAID LEVEL during VD creation in stpe of OMSS.
- OMSS GUI Display improper PD list for successfull RAID to NON RAID conversion on ESXi 5.5.
- After enclosure hot plug fromSAS12Gbps HBA-OMSA showing Enclosure presence.
- OMSA GUI shows BACKPLANE info for T130 server; but T130 is a CABLED HDD config.
- Unassign GHS shows up for PCIe SSD NVMe Disks.
- NVMe PCIeSSD drivers are not sensing in OMSS on RHEL 7.2
- RAID Level Migration from RAID1 to RAID10 without adding any Physical Disks in OMSS GUI with PERC9.2 FW
Enhancements:
The release highlights of Server Administrator are:
1. Support for following server:
- PowerEdge Server R830
2. Support for the following Operating Systems:
- Novell SUSE Linux Enterprise Server 12 Service Pack 1.
- Red hat Enterprise Linux 7.2
NOTE: Citrix XenServer Operating System support has been dropped for Server Administrator and Storage Management.
3. Support for following Web Browser:
- Google Chrome Version 45
- Mozilla Firefox Version 40
4.Support for following features:
- GP-GPU card enablement on C4130
- SNMP Test Trap Button feature on all Linux Operating System.
- Notifying presence of iDRAC on Dell Servers.
5. Added new functionalities inStorage Management:
- Support for 2.5-inch 4KB SATA drivers on PERC 9 family of hardware controllers.
- Support for rear SATA on PowerEdge R730XD connected to software RAID S130 controller.
- Support for PMC SAS Expander on PowerEdge R730.
- Support for Samsung PM1725 NVMe device.
- Support for flexible backplane zoning functionality on backplanes with 24 slots - PowerEdge R630 and PowerEdge R730XD.
- Support for setting Disk Cache Policy at Physical Disk and Virtual Disk level on software RAID S130 controller.
- Support for setting Non-RAID disk cache policy on PERC9 controllers.
- Support for HBA H330 Adapter/Mini Controller.
NOTE: For then list of supported Operating Systems and Dell Servers, see the Dell Systems Software Support Matrix in the required version on OpenManage Software at dell.com/openmanagemanuals.
NOTE: For more information about the features introduced in this release, see the Server Administrator contect-sensitve online help.
Más informaciónThe following problems are reported in earlier releases of Server Administrator and have been corrected in this release:
- Connection service crash in Windows OS after enabling/disabling session timeout in OMSA.
- PCIeSSD Drives are showing up in the OMSA slots view instead of the Brdige Card.
- NIC and TEAMED NIC association corrected.
- Add attacheement failure fixed on Safari 8.0
- Mellanox card doesnt display all the interface names (ports) in OMSA after we reboot server.
- Omacs crash if new network interfaces appear.
- Broadcom NXII duplicate nic info is showing in OMSA gui after flashing the driver.
- Command log message is not generated for SSL Protocol setting in GUI.
- OMSA reporting Degraded for Unknown Reason status under Hardware Performance.
- OMSA spawning kipmi0 thread even on 12G/13G where IPMI should use interrupts.
- NVMe:Slot occupancy report was displaying single backplane ID and backplane name in GUI and CLI.
- Concatenated option is observed in RAID LEVEL during VD creation in stpe of OMSS.
- OMSS GUI Display improper PD list for successfull RAID to NON RAID conversion on ESXi 5.5.
- After enclosure hot plug fromSAS12Gbps HBA-OMSA showing Enclosure presence.
- OMSA GUI shows BACKPLANE info for T130 server; but T130 is a CABLED HDD config.
- Unassign GHS shows up for PCIe SSD NVMe Disks.
- NVMe PCIeSSD drivers are not sensing in OMSS on RHEL 7.2
- RAID Level Migration from RAID1 to RAID10 without adding any Physical Disks in OMSS GUI with PERC9.2 FW
Enhancements:
The release highlights of Server Administrator are:
1. Support for following server:
- PowerEdge Server R830
2. Support for the following Operating Systems:
- Novell SUSE Linux Enterprise Server 12 Service Pack 1.
- Red hat Enterprise Linux 7.2
NOTE: Citrix XenServer Operating System support has been dropped for Server Administrator and Storage Management.
3. Support for following Web Browser:
- Google Chrome Version 45
- Mozilla Firefox Version 40
4.Support for following features:
- GP-GPU card enablement on C4130
- SNMP Test Trap Button feature on all Linux Operating System.
- Notifying presence of iDRAC on Dell Servers.
5. Added new functionalities inStorage Management:
- Support for 2.5-inch 4KB SATA drivers on PERC 9 family of hardware controllers.
- Support for rear SATA on PowerEdge R730XD connected to software RAID S130 controller.
- Support for PMC SAS Expander on PowerEdge R730.
- Support for Samsung PM1725 NVMe device.
- Support for flexible backplane zoning functionality on backplanes with 24 slots - PowerEdge R630 and PowerEdge R730XD.
- Support for setting Disk Cache Policy at Physical Disk and Virtual Disk level on software RAID S130 controller.
- Support for setting Non-RAID disk cache policy on PERC9 controllers.
- Support for HBA H330 Adapter/Mini Controller.
NOTE: For then list of supported Operating Systems and Dell Servers, see the Dell Systems Software Support Matrix in the required version on OpenManage Software at dell.com/openmanagemanuals.
NOTE: For more information about the features introduced in this release, see the Server Administrator contect-sensitve online help.
Versión
8.3, A00
Fecha de publicación
29 mar 2016
Tipo de descarga
Imágenes ISO de DVD
Categoría
Gestión de sistemas segura
Importancia
OpcionalDell Technologies recomienda revisar esta actualización para determinar si se aplica a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formatos disponibles
Formato de archivo: Imagen ISO para CD-ROM
Nombre de archivo: OM_SMTD_830_A00.iso
Tamaño de archivo: 1.46 GB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene una imagen ISO utilizada para crear un CD-ROM. Descargue el archivo en una carpeta en su disco duro y, a continuación, cree un CD con el software de grabación de CD que prefiera.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
1f6ffad72b04437edb76125f081e193d
SHA1:
78102d7e6ebe5f6596bffa7213c3bf744e204724
SHA-256:
35b5edef41fc375ed1864525217d5865059aacdfd797bab3a5690036efdbca32
Al realizar la descarga, acepta los términos del Acuerdo de licencia de software de Dell. (en ingles)
Sistemas operativos compatibles
Novell SuSE Linux ES 11
Windows Server 2008 x64
Windows Server 2012
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
SUSE Linux ES 12
Windows Server 2012 R2
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 64-bit
Windows Server 2008 x86
Windows Server 2008 R2
VMware ESXi 5.1
VMware ESXi 5.5
VMware ESXi 6.0
Se aplica a
OpenManage System Tools and Documentation DVD ISO
Instrucciones de instalación
Download
1. Click the Download File link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.Extract Files
3. Burn this downloaded ISO into a DVD
4. Mount the DVD and run the autorun.exe
1. Click the Download File link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.Extract Files
3. Burn this downloaded ISO into a DVD
4. Mount the DVD and run the autorun.exe
Ayuda para controladores y tutoriales
Para ver más descargas, vaya a Controladores y descargas. Para obtener ayuda sobre cómo usar la información de esta página, visite Tutoriales y ayuda para controladores.