Dell Networking 8100, versión de firmware 6.3.0.15, A18; las versiones de firmware 6.3.0.15 y 6.3.0.16 de la serie N modificaban el comportamiento de las máscaras comodín de ACL de las versiones anteriores. Si el cliente actualmente está implementando o planea implementar ACL, recomendamos actualizar los switches de la serie N a la versión de firmware 6.3.0.18 o posterior.
Es necesario reiniciar. Instalado Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.3.0.15); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.3.0.15). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.3.0.15.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.3.0.15). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.15_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.3.0.15 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.3.0.15) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.3.0.15). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.15_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.3.0.15 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.3.0.15) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.3.0.15). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Recomendado
Comprobar compatibilidad
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistemaIntroduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto. ¿Cómo lo hago?
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema. Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
New Features & Enhancements:
None
Fixes:
Case-ID Summary
966427/PSE028608 - N3024F-6.2.1.6: Ports1 to 8 of unit 2 goes down abruptly in a 2 member stack.
1052083/PSE033357 - 6.3.0.6-Interfaces goes to D-Down state, instead of STP BLK state.
1039937/PSE029342 - N2048P-6.2.7.2:First IGMP membership report from IPTV is dropped at N2k.
1036347/PSE032357 - N2048P/6.2.7.2:VLAN 1 release IP Address from time to time.
1046017/PSE032914 - N3048-6.2.7.2:DHCP client receives a renewed IP from DHCP server[N3k],after PXE boot process.
1047730/PSE032982 - N2048/6.3.0.6/loopguard feature is still learning MACs and passing traffic when in DSC state.
1043417/PSE032515 - The RSPAN mirror packets are double tagged at destination port.
1040324/PSE032560 - 6.2.7.2/N4064F/Packet loss observed on 1G port-channel.
1055447/PSE033587,PSE033632 - N2000-6.3.0.9-Default Hashing algorithm(7) in port channel leads to Packet drop issue.
1056795/PSE033702 - 6.3.0.9- "Terminal monitor" doesn't work on first ssh session.
1043442/PSE033089 - N20xx-6.2.x/6.3.x- Issues seen when using portfast + BPDU-protection on edge ports.
1015160/Internal - N4000-N40xx Fan module failure reporting issue.
1036434/Internal - 6.3.0.4-N4000-Green Ethernet not responding to NIM causing NIM timeout and crash.
1054538/PSE033448 - N3048P-6.3.0.9:Logs "Unable to get access to POE controller." on stack.
1049932/PSE033235 - N-Series-6.2.6.6:GUI option for iSCSI missing in 6.2.6.6+ FW loads.
1053060/PSE033416 - N-Series-6.3.x:Unable to change the port speed via GUI.
1038194/PSE032484 - 6.2.7.2-SNMPWalk Response "http://0.0.0.0" - 1.3.6.1.4.1.674.10895.3000.1.2.100.6.
1042486/PSE032515 - RSPAN-Monitor session with mac ACL option is blocking the other data traffic at reflector port.
1048264/PSE032515 - N20xx-6.3.0.6:RSPAN-Traffic does not resume after upgrade to 6.3.0.6 and removing RSPAN.
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.15_Release_Notes"
Más informaciónNone
Fixes:
Case-ID Summary
966427/PSE028608 - N3024F-6.2.1.6: Ports1 to 8 of unit 2 goes down abruptly in a 2 member stack.
1052083/PSE033357 - 6.3.0.6-Interfaces goes to D-Down state, instead of STP BLK state.
1039937/PSE029342 - N2048P-6.2.7.2:First IGMP membership report from IPTV is dropped at N2k.
1036347/PSE032357 - N2048P/6.2.7.2:VLAN 1 release IP Address from time to time.
1046017/PSE032914 - N3048-6.2.7.2:DHCP client receives a renewed IP from DHCP server[N3k],after PXE boot process.
1047730/PSE032982 - N2048/6.3.0.6/loopguard feature is still learning MACs and passing traffic when in DSC state.
1043417/PSE032515 - The RSPAN mirror packets are double tagged at destination port.
1040324/PSE032560 - 6.2.7.2/N4064F/Packet loss observed on 1G port-channel.
1055447/PSE033587,PSE033632 - N2000-6.3.0.9-Default Hashing algorithm(7) in port channel leads to Packet drop issue.
1056795/PSE033702 - 6.3.0.9- "Terminal monitor" doesn't work on first ssh session.
1043442/PSE033089 - N20xx-6.2.x/6.3.x- Issues seen when using portfast + BPDU-protection on edge ports.
1015160/Internal - N4000-N40xx Fan module failure reporting issue.
1036434/Internal - 6.3.0.4-N4000-Green Ethernet not responding to NIM causing NIM timeout and crash.
1054538/PSE033448 - N3048P-6.3.0.9:Logs "Unable to get access to POE controller." on stack.
1049932/PSE033235 - N-Series-6.2.6.6:GUI option for iSCSI missing in 6.2.6.6+ FW loads.
1053060/PSE033416 - N-Series-6.3.x:Unable to change the port speed via GUI.
1038194/PSE032484 - 6.2.7.2-SNMPWalk Response "http://0.0.0.0" - 1.3.6.1.4.1.674.10895.3000.1.2.100.6.
1042486/PSE032515 - RSPAN-Monitor session with mac ACL option is blocking the other data traffic at reflector port.
1048264/PSE032515 - N20xx-6.3.0.6:RSPAN-Traffic does not resume after upgrade to 6.3.0.6 and removing RSPAN.
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.15_Release_Notes"
Versión
6.3.0.15, A18
Fecha de publicación
17 jun 2016
Tipo de descarga
Firmware
Categoría
Red
Importancia
RecomendadoDell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización recoge cambios para mantener el estado general del sistema. Garantiza que el software del sistema esté actualizado y que sea compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles Ver información importante
Formato de archivo: Extrae archivos directamente al disco local
Nombre de archivo: PC8100v6.3.0.15a18.zip
Tamaño de archivo: 54.74 MB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este formato de archivo se compone de un fichero de archivos que se pueden descomprimir en un directorio del disco duro. La instalación se puede realizar desde ese directorio.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
4a18742cb9cb2ad476b1f17ff4ce852f
SHA1:
4c0893311ac7ad4559e29bc6ea1ab1de1b12b1ba
SHA-256:
75052fe45a0e2403b7b90df31456656eb944f595b974f8a93bca8449de829086
Formato de archivo: Un archivo de texto que contiene información sobre correcciones y mejoras pensadas para el cliente
Nombre de archivo: PC8100ReadMev6.3.0.15a18.txt
Tamaño de archivo: 3.19 KB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este formato de archivo contiene texto sin formato que puede verse con un editor de texto estándar.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
31c3aa17d03fec7139d42d0e95f640ad
SHA1:
15ebfbc067ae9b181e32d64274f301d60e8946b2
SHA-256:
311878e16db1707934aae45492b69038d407bb7c981ea99efb8bca4cbd2857a7
Al realizar la descarga, acepta los términos del Acuerdo de licencia de software de Dell. (en ingles)
Información importante
New Features & Enhancements:
None
Fixes:
Case-ID Summary
966427/PSE028608 - N3024F-6.2.1.6: Ports1 to 8 of unit 2 goes down abruptly in a 2 member stack.
1052083/PSE033357 - 6.3.0.6-Interfaces goes to D-Down state, instead of STP BLK state.
1039937/PSE029342 - N2048P-6.2.7.2:First IGMP membership report from IPTV is dropped at N2k.
1036347/PSE032357 - N2048P/6.2.7.2:VLAN 1 release IP Address from time to time.
1046017/PSE032914 - N3048-6.2.7.2:DHCP client receives a renewed IP from DHCP server[N3k],after PXE boot process.
1047730/PSE032982 - N2048/6.3.0.6/loopguard feature is still learning MACs and passing traffic when in DSC state.
1043417/PSE032515 - The RSPAN mirror packets are double tagged at destination port.
1040324/PSE032560 - 6.2.7.2/N4064F/Packet loss observed on 1G port-channel.
1055447/PSE033587,PSE033632 - N2000-6.3.0.9-Default Hashing algorithm(7) in port channel leads to Packet drop issue.
1056795/PSE033702 - 6.3.0.9- "Terminal monitor" doesn't work on first ssh session.
1043442/PSE033089 - N20xx-6.2.x/6.3.x- Issues seen when using portfast + BPDU-protection on edge ports.
1015160/Internal - N4000-N40xx Fan module failure reporting issue.
1036434/Internal - 6.3.0.4-N4000-Green Ethernet not responding to NIM causing NIM timeout and crash.
1054538/PSE033448 - N3048P-6.3.0.9:Logs "Unable to get access to POE controller." on stack.
1049932/PSE033235 - N-Series-6.2.6.6:GUI option for iSCSI missing in 6.2.6.6+ FW loads.
1053060/PSE033416 - N-Series-6.3.x:Unable to change the port speed via GUI.
1038194/PSE032484 - 6.2.7.2-SNMPWalk Response "http://0.0.0.0" - 1.3.6.1.4.1.674.10895.3000.1.2.100.6.
1042486/PSE032515 - RSPAN-Monitor session with mac ACL option is blocking the other data traffic at reflector port.
1048264/PSE032515 - N20xx-6.3.0.6:RSPAN-Traffic does not resume after upgrade to 6.3.0.6 and removing RSPAN.
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.15 Release_Notes"
None
Fixes:
Case-ID Summary
966427/PSE028608 - N3024F-6.2.1.6: Ports1 to 8 of unit 2 goes down abruptly in a 2 member stack.
1052083/PSE033357 - 6.3.0.6-Interfaces goes to D-Down state, instead of STP BLK state.
1039937/PSE029342 - N2048P-6.2.7.2:First IGMP membership report from IPTV is dropped at N2k.
1036347/PSE032357 - N2048P/6.2.7.2:VLAN 1 release IP Address from time to time.
1046017/PSE032914 - N3048-6.2.7.2:DHCP client receives a renewed IP from DHCP server[N3k],after PXE boot process.
1047730/PSE032982 - N2048/6.3.0.6/loopguard feature is still learning MACs and passing traffic when in DSC state.
1043417/PSE032515 - The RSPAN mirror packets are double tagged at destination port.
1040324/PSE032560 - 6.2.7.2/N4064F/Packet loss observed on 1G port-channel.
1055447/PSE033587,PSE033632 - N2000-6.3.0.9-Default Hashing algorithm(7) in port channel leads to Packet drop issue.
1056795/PSE033702 - 6.3.0.9- "Terminal monitor" doesn't work on first ssh session.
1043442/PSE033089 - N20xx-6.2.x/6.3.x- Issues seen when using portfast + BPDU-protection on edge ports.
1015160/Internal - N4000-N40xx Fan module failure reporting issue.
1036434/Internal - 6.3.0.4-N4000-Green Ethernet not responding to NIM causing NIM timeout and crash.
1054538/PSE033448 - N3048P-6.3.0.9:Logs "Unable to get access to POE controller." on stack.
1049932/PSE033235 - N-Series-6.2.6.6:GUI option for iSCSI missing in 6.2.6.6+ FW loads.
1053060/PSE033416 - N-Series-6.3.x:Unable to change the port speed via GUI.
1038194/PSE032484 - 6.2.7.2-SNMPWalk Response "http://0.0.0.0" - 1.3.6.1.4.1.674.10895.3000.1.2.100.6.
1042486/PSE032515 - RSPAN-Monitor session with mac ACL option is blocking the other data traffic at reflector port.
1048264/PSE032515 - N20xx-6.3.0.6:RSPAN-Traffic does not resume after upgrade to 6.3.0.6 and removing RSPAN.
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.0.15 Release_Notes"
Se aplica a
PowerConnect 8132
PowerConnect 8132F
PowerConnect 8164
PowerConnect 8164F
Instrucciones de instalación
(1) Download the zip file - PC8100v6.3.0.15a18.zip
(2) Extract the image file "N4000v6.3.0.15.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.3.0.15 Firmware.pdf" extracted from zip file.
Reboot will be required
(2) Extract the image file "N4000v6.3.0.15.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.3.0.15 Firmware.pdf" extracted from zip file.
Reboot will be required
¿Necesita ayuda para solucionar problemas de conexión de red?
Consulta la guía de solución de problemas de red de DellAyuda para controladores y tutoriales
Para ver más descargas, vaya a Controladores y descargas. Para obtener ayuda sobre cómo usar la información de esta página, visite Tutoriales y ayuda para controladores.