Dell Networking N4000 Series, Firmware Version 6.1.1.7, A04

Reinicio requerido Instalada Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Both Dell PowerConnect N4000 Series and Dell Networking PC8100 Series switches shares the same firmware image version (for example., N4000v6.1.1.7.stk). Dell Networking N4000 series switches can be stacked with Dell Networking PC8100 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.1.1.7). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions (6.1.1.7)

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes".

Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N4000 Series Switches From Version 6.x.x.x to 6.1.1.7 Firmware"
Recomendado

Comprobar compatibilidad

Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema

Ingrese su modelo o etiqueta de servicio de Dell

¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo

Este controlador no es compatible

Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.

Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.

Correcciones y mejoras

Fixes:
753276 When applying ACL to vlan interface PBR stops working
762345 N40xx v6.0.1.3 Random FAN and PMBUS errors
769220 igmp snooping/flooding implementation change
772696 Power negotiation fails with Cisco 9971 IP Phone
789841 QinQ does not work after reload of individual UNIT or Stack Reload or Stack UNIT reload
764268 emweb_main crashdump analysis required
780759 PC81XX N series , no way to enable IGMP globally from CLI, can only enable IGMP globally from GUI.
794305 N40xx v6.0.1.3 confirmation of traffic-shape minimum bandwidth
796923 6.0.1.3 - show ip igmp membership command shows incorrect messaging about "ip igmp" command
798430 Many customer complaints on N2000 fan noise
796256 N2048P --- Issues powering up POE devices on certain switch port interfaces.
792879 N2048P --- Issues powering up POE devices on certain switch port interfaces.
749031 Switch crashes intermittently with tArpCallback & IpHelperTask task related errors
804613 fw 6.1.0.1 - VLAN1 down after assigning static IP address
819033 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (kernel patch)
819034 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (u-boot patch)
810135 N3000/N2000 --- Stack's management IP can't be pinged after stack failover happened.
809376 6.1.0.1 - SNMP MIB for Power Supply and Fan Tray info of all units in the stack
819042 DVLAN: Port Channel member links are flapping up and down
815537 fix for OpenSSL SSLTLS MITM vulnerability CVE-2014-0224
819041 DUT crashes when the pbr with mac acl is applied on the vlan routing interface
819040 PBR : ACL associated to a VLAN interface's displays the message on the console "Access groups are not supported when configured on the same interface as a PBR route map"
816937 Hapi dvlan notification handler is trying to configure customer ports in legacy mode(this configuration is not supported)
819035 During initiate failover, Multicast traffic loss is seen for longer time and also few log messages are observed on console
812302 [N4000/N4064]Dell SFP GF76J is showing as N/A when we run show interface transceiver.
819043 Clone: PBR: IP Precedence is not working when we delete and re-configure route-map
819052 Traffic is forwording to a routing inteface even though PBR rule is not applied on that interface
816218 6.1.0.1 Continuous LACP flap on Force 10 device when used with N-series MLAG implementation
820595 Seeing console hang on enabling "ip routing" with PBR rule and ACL rule applied on same Vlan interface.
280478 Observed dtl crash
812329 N2000 stack showing memory errors on members 8-11 when on version 6.1.0.1,
828011 When default route is present in camero the default nexthop option of PBR is failed
826341 6.1.0.6 - N-Series - Configured 10G ports return to default configuration after power on reboot.

Enhancements:
None
Más información

Versión

6.1.1.7, A04

Fecha de publicación

05 sept 2014

Tipo de descarga

Firmware

Categoría

Network, Ethernet & Wireless

Importancia

Recomendado
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles

Formato de archivo: Extrae archivos directamente al disco local
File Name: N4000v6.1.1.7a04.zip
Tamaño del archivo: 22.07 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo consiste en un archivo de archivos que se pueden descomprimir a un directorio en el disco duro. La instalación puede realizarse desde ese directorio.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
9035e40496e57c2c302f37bc06fe88a4
SHA1:
9f24737fe6993fd397efce6fa3ef7b9f576cf73e
SHA-256:
07a90e0d89fdf6d12848b2f36f98eff84467fbefe1923106112beb5e567f1c70

Formato de archivo: Un archivo de texto que contiene información práctica sobre correcciones y mejoras
File Name: N4000ReadMev6.1.1.7a04.txt
Tamaño del archivo: 3.14 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo contiene texto sin formato que se puede ver con un editor de texto estándar.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
928c7df0bcbb448fd26513361eeef398
SHA1:
c0aba198757635ae185245525a68d6a49b10f408
SHA-256:
3aeaa11366992dd168812d8e05a6b9de6af347361c72990e7a3a82cf47e10f2c

Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)

Detalles adicionales

Mostrar todo | Esconder todo
Dell N4032
Dell N4032F
Dell N4064
Dell N4064F
(1) Download the zip file - N4000v6.1.1.7a04.zip
(2) Extract the image file "N4000v6.1.1.7.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N4000 Series Switches From Version 6.x.x.x to 6.1.1.7 Firmware.pdf" extracted from zip file

Reboot will be required

¿Necesita ayuda con los problemas de conexiones de red?

Busque la solución en la guía de solución de problemas de red de Dell

Ayuda y tutoriales para controladores