Dell Networking N3000 Series, Firmware Version 6.5.3.6
Reinicio requerido Instalada Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Dell EMC Networking N3000 series switches can mixed stack with N3132PX-ON switches of up to 8 units. Mixed stack of N3000 series Switches and N3132PX-ON switch support 1024 active VLANs configurable in the range 1-4093 and does not support MMRP/MVRP. Dell EMC Networking N3132PX-ON switches has an expansion slot to install optional stacking module with two mini-SAS stack ports. Dell EMC Networking N3000 Series switches are available with two fixed mini-SAS stack ports.
Administrators configuring mixed stack with N3000 Series switches and N3132PX-ON MUST follow the instructions documented in the "Upgrading Dell Networking N3132PX-ON Switches to Version 6.5.3.36(Advanced) or 6.5.3.6(AdvancedLite).pdf". It is strongly recommended to backup current switch configuration before forming mixed stacking.
New CPLD version 20 is available in release 6.5.1.1 and later (6.5.3.6) for both N3000 and N2000 Series switches. After upgrading the switches to FW v6.5.1.1 and later (6.5.3.6), the CPLD can be updated to version 20 from CLI using the command - 'update cpld'. To update CPLD on stack members, run - 'update cpld' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update completes, the switch will reset on its own.
**Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.5.3.6 with CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version**
Downgrading N3000 and N2000 Series switches from firmware version 6.5.3.6 with the updated CPLD version 15 or 17 or 20 to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2 or B.6.3.32 (N3000_N2000vB.6.3.2.stk or N3000_BGPvB.6.3.32.stk) attached to zip file. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N3000 Series Switches From Version 6.x.x.x to 6.5.3.6" procedure.
Administrators configuring mixed stack with N3000 Series switches and N3132PX-ON MUST follow the instructions documented in the "Upgrading Dell Networking N3132PX-ON Switches to Version 6.5.3.36(Advanced) or 6.5.3.6(AdvancedLite).pdf". It is strongly recommended to backup current switch configuration before forming mixed stacking.
New CPLD version 20 is available in release 6.5.1.1 and later (6.5.3.6) for both N3000 and N2000 Series switches. After upgrading the switches to FW v6.5.1.1 and later (6.5.3.6), the CPLD can be updated to version 20 from CLI using the command - 'update cpld'. To update CPLD on stack members, run - 'update cpld
**Below information is applicable ONLY for N2000/N3000 switches upgraded to 6.5.3.6 with CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version**
Downgrading N3000 and N2000 Series switches from firmware version 6.5.3.6 with the updated CPLD version 15 or 17 or 20 to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2 or B.6.3.32 (N3000_N2000vB.6.3.2.stk or N3000_BGPvB.6.3.32.stk) attached to zip file. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N3000 Series Switches From Version 6.x.x.x to 6.5.3.6" procedure.
Recomendado
Comprobar compatibilidad
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistemaIngrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo
Este controlador no es compatible
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Inicie sesión en Windows como administrador para utilizar el escaneo automático. Si ya inició sesión como administrador y ve este mensaje, reinicie el sistema. El administrador de TI administra el sistema y es posible que las funciones sean limitadas.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
Fixes:
FIELD-3518/CS7304375-Some of the MAC movement messages has additional FFFFFF in MAC addresses
FIELD-3508/CS7248785-Radius based SSH login fails with multiple radius-servers configured
FIELD-3327/CS6466035-SNMP table 1.3.6.1.2.1.17.7.1.2.2 OID returns unexpected character
FIELD-3104/FIELD-3613/CS5837205-DHCP Client fails to get IP address assigned with dot1x mac-based authenticated port.
FIELD-2841/CS7521149-When the port is removed from the port-channel, it goes to STP block state.
FIELD-3553/CS7418559-Trying to free buffer at address 0xa1f3b72c (descriptor at 0xa1f3b728) that has already been freed.
FIELD-3545/CS7408145-Crash at umWorkerTask
FIELD-3563/CS7454416-Hosts loses multicast stream abruptly after some time.
Internal-DHCP snooping entry is lost when there is release and renew.
Enhancements:
ATP-RPC message stability enhancement
Más informaciónFIELD-3518/CS7304375-Some of the MAC movement messages has additional FFFFFF in MAC addresses
FIELD-3508/CS7248785-Radius based SSH login fails with multiple radius-servers configured
FIELD-3327/CS6466035-SNMP table 1.3.6.1.2.1.17.7.1.2.2 OID returns unexpected character
FIELD-3104/FIELD-3613/CS5837205-DHCP Client fails to get IP address assigned with dot1x mac-based authenticated port.
FIELD-2841/CS7521149-When the port is removed from the port-channel, it goes to STP block state.
FIELD-3553/CS7418559-Trying to free buffer at address 0xa1f3b72c (descriptor at 0xa1f3b728) that has already been freed.
FIELD-3545/CS7408145-Crash at umWorkerTask
FIELD-3563/CS7454416-Hosts loses multicast stream abruptly after some time.
Internal-DHCP snooping entry is lost when there is release and renew.
Enhancements:
ATP-RPC message stability enhancement
Versión
6.5.3.6, A45
Fecha de publicación
22 mar 2019
Tipo de descarga
Sistemas operativos
Categoría
Network, Ethernet & Wireless
Importancia
RecomendadoDell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles Ver información importante
Formato de archivo: Extrae archivos directamente al disco local
File Name: N3000v6.5.3.6.A45.zip
Tamaño del archivo: 144.47 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo consiste en un archivo de archivos que se pueden descomprimir a un directorio en el disco duro. La instalación puede realizarse desde ese directorio.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
b5fc2a9162300a80428b87c7ffb16a80
SHA1:
90e7dbe0e6c96b7f7dfb3b294711045d7986e555
SHA-256:
8be4ac8035d008b35d940e1f670d406ab52b07e095de220025a6a2af95577075
Formato de archivo: Un archivo de texto que contiene información práctica sobre correcciones y mejoras
File Name: N3000ReadMev6.5.3.6.A45.txt
Tamaño del archivo: 4.72 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo contiene texto sin formato que se puede ver con un editor de texto estándar.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
6fecadfda7829619efc55ea9c369e557
SHA1:
56cc3e5fdf46facd9ecc1634fda486f249642e6b
SHA-256:
1b4bccaf52b04aec53b0512c47d7ea6438d1418e38440741893ac1af23a256d4
Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)
Información importante
Fixes:
FIELD-3518/CS7304375-Some of the MAC movement messages has additional FFFFFF in MAC addresses
FIELD-3508/CS7248785-Radius based SSH login fails with multiple radius-servers configured
FIELD-3327/CS6466035-SNMP table 1.3.6.1.2.1.17.7.1.2.2 OID returns unexpected character
FIELD-3104/FIELD-3613/CS5837205-DHCP Client fails to get IP address assigned with dot1x mac-based authenticated port.
FIELD-2841/CS7521149-When the port is removed from the port-channel, it goes to STP block state.
FIELD-3553/CS7418559-Trying to free buffer at address 0xa1f3b72c (descriptor at 0xa1f3b728) that has already been freed.
FIELD-3545/CS7408145-Crash at umWorkerTask
FIELD-3563/CS7454416-Hosts loses multicast stream abruptly after some time.
Internal-DHCP snooping entry is lost when there is release and renew.
Enhancements:
ATP-RPC message stability enhancement
FIELD-3518/CS7304375-Some of the MAC movement messages has additional FFFFFF in MAC addresses
FIELD-3508/CS7248785-Radius based SSH login fails with multiple radius-servers configured
FIELD-3327/CS6466035-SNMP table 1.3.6.1.2.1.17.7.1.2.2 OID returns unexpected character
FIELD-3104/FIELD-3613/CS5837205-DHCP Client fails to get IP address assigned with dot1x mac-based authenticated port.
FIELD-2841/CS7521149-When the port is removed from the port-channel, it goes to STP block state.
FIELD-3553/CS7418559-Trying to free buffer at address 0xa1f3b72c (descriptor at 0xa1f3b728) that has already been freed.
FIELD-3545/CS7408145-Crash at umWorkerTask
FIELD-3563/CS7454416-Hosts loses multicast stream abruptly after some time.
Internal-DHCP snooping entry is lost when there is release and renew.
Enhancements:
ATP-RPC message stability enhancement
Se aplica a
Dell N3024
Dell N3024F
Dell N3024P
Dell N3048
Dell N3048P
Instrucciones de instalación
(1) Download the zip file - N3000v6.5.3.6.A45.zip
(2) Extract the image file "N3000AdvLitev6.5.3.6.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N3000 Series Switches From version 6.x.x.x to 6.5.3.6 Firmware.pdf" extracted from zip file
(2) Extract the image file "N3000AdvLitev6.5.3.6.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N3000 Series Switches From version 6.x.x.x to 6.5.3.6 Firmware.pdf" extracted from zip file
¿Necesita ayuda con los problemas de conexiones de red?
Busque la solución en la guía de solución de problemas de red de DellAyuda y tutoriales para controladores
Para obtener más descargas, vaya a Controladores y descargas. Para obtener ayuda con el uso de la información en esta página, visite Tutoriales y ayuda sobre controladores.