LSI Logic PERC 4e/Si, v.5B2D, A19

After installing this firmware and rebooting, a consistency check will automatically begin on RAID 5 and 50 virtual disks with 5 or more physical disks to ensure parity information is correct. The consistency check cannot be terminated and will resume at its last point following a reboot. This consistency check will appear as a Background Initialization but will only perform a consistency check with no data being modified. The consistency check runs in the background, allowing the virtual disks to remain accessible during the check. While this background check is designed to minimize performance impact, some degradation in performance may occur until the check is complete, especially under heavy I/O.

Custom Instructions for BR186614.exe:

This program creates a bootable diskette to upgrade the firmware of the
controllers. You will need a formatted 3 1/2 inch floppy diskette for the
following procedure.

1) Download the file to a directory on your hard drive. The file downloaded is
a self extracting executable.
2) Insert a blank diskette into the system's diskette drive.
3) Double click on the file that you downloaded and follow the instructions on
the screen to extract the files to the diskette.
4) Insert the diskette into the system with the RAID controller for which you
want to update the firmware and boot the system.
5) Follow the instructions on the screen to update the firmware.

NOTICE: Pflash.exe will be executed automatically and will report existing code
level and prompt you to reconfirm before starting the firmware upgrade
process.

To perform this process in non-interactive mode please execute,
Pflash /?
and read about possible command line switches.

6) Remove the diskette and reboot the system.
Instructions for PE1850_RAID_FRMW_LX_R186614.BIN:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation

1. Read over the release information presented by executing the ./PE1850_RAID_FRMW_LX_R186614.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./PE1850_RAID_FRMW_LX_R186614.BIN from the shell.
4. Follow the remaining prompts to perform the update.


GnuPG Signature of Dell Update Package Instructions for PE1850_RAID_FRMW_LX_R186614.BIN.sign:

Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, PE1850_RAID_FRMW_LX_R186614.BIN.sign

Instructions for PE1850_RAID_FRMW_WIN_R186614.EXE:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Custom Instructions for perc4e-FWBB5B2D-A19.txt:

Download the readme file to view information about this release.