Download Files
Formato de archivo: Los paquetes de actualizaciones de Dell (DUP) en el formato de 32 bits de Microsoft Windows han sido diseñados para ejecutarse en los sistemas operativos de 64 bits de Microsoft Windows. Los paquetes de actualizaciones de Dell (DUP) en el formato de 64 bits de Microsoft Windows solo se ejecutarán en los sistemas operativos de 64 bits de Microsoft Windows. Al seleccionar una actualización de un controlador de dispositivo asegúrese de seleccionar el que sea apropiado para su sistema operativo.
Nombre del archivo: DRVR_WIN_R126743.EXE
Tamaño del archivo: 5.01 MB
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5: D2DBA12978EFD78B2F6CF9E47BAC762C
Formato de archivo: Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Nombre del archivo: R126743.EXE
Tamaño del archivo: 250.66 KB
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5: d1aef73ede1e93a0f934e3124ae93474
Correcciones y mejoras
- corrects potential I/O performance issues on RAID 1 arrays in cases where a failed hard drive has not yet been removed from or replaced in the system.
- corrects potential system hang condition in cases when a failed hard drive has not been removed from the system
- corrects a potential issue caused by a variable not being cleared properly.
- corrects an issue seen with management software when retrieving serial numbers from hard disks.
- corrects an issue where certain error conditions were not returning sense data per SATA specification.
Información importante
Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
Sistemas operativos compatibles
Windows Server 2003
Windows 2000
Instrucciones de instalación
Dell Update Package Instructions for DRVR_WIN_R126743.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R126743.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Install
A. New OS Installation
1. Unzip files to a blank floppy disk --
2. Start installing OS.
3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers.
4. When the Windows Setup window is displayed, Press S to specify additional device(s).
5. Insert the driver diskette and press ENTER.
6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices.
7. If there are any additional devices to be installed, specify them now by pressing S and providing the driver diskettes for them as prompted.
8. When all devices are specified, continue to the next step by pressing ENTER.
B. Driver Update Installation
Windows XP/Server 2003 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Select "Adaptec Embedded Serial ATA HostRAID Controller" .
4. Select the "Driver" tab.
5. Click on "Update Driver".
6. If asked whether to allow Windows to connect to Windows Update, choose "No, not this time" and click "Next". Otherwise, skip to next step.
7. Choose "Install from a list of specific location (Advanced)", and click "Next".
8. Check "Include this location in the search:".
9. Enter the locations (hard drive or floppy) where you saved extracted files and click "Next".
10. Click "Finish".
11. If prompted to reboot to complete update, do so.
Windows Server 2000 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Open "Adaptec Embedded Serial ATA HostRAID Controller".
4. Select the "Driver" tab.
5. Click on "Update Driver", then click next at the Driver Wizard welcome screen.
6. Select “Display a list of the known drivers for this device so that I can choose a specific driver”, then click next.
8. Click “Have Disk…”.
9. Enter the locations (hard drive or floppy) where you saved extracted files and click OK.
10. The located driver will be displayed on the, “Select a Device Driver “ page. Select the driver and then click next.
11. Click next on the, “Start Device Driver Installation” page.
12. Click “Finish”.
13. When prompted to restart the computer, click “Yes” to restart immediately (recommended) or click “No” to postpone the restart if necessary.
Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.