Dell OptiPlex 7050 System BIOS

Uudelleenkäynnistys vaaditaan

Älä sammuta tietokonetta tai irrota sitä virtalähteestä BIOS-päivityksen aikana. Muutoin tietokone voi vahingoittua. Päivityksen aikana tietokone käynnistyy uudelleen ja näyttö saattaa pimentyä hetkeksi.

Lue alla olevat asennusohjeet ja tärkeät tiedot ennen päivittämistä.

Ajurin tunnus : R4XWW

Tärkeys : Kriittinen

Versio : 1.11.0, 1.11.0 Uusin versio Suositeltu versio Uusin ja suositeltu versio

Julkaisupäivä : 26 marrask. 2018

Lataustyyppi : Järjestelmän BIOS

Luokka : BIOS

This package contains the Dell system BIOS update for Dell OptiPlex 7050 Tower, OptiPlex 7050 Small Form Factor and OptiPlex 7050 Micro that runs the Windows operating system. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices. This update fixes the issue where the Intel Fast Call feature will not start during boot and addresses the issue where the system may reboot continuously after restoring custom setting on an Intel Platform Trust Technology supported system. It includes the latest firmware that addresses the Intel Security Advisories.

Lataa tiedostoja

Tiedostomuoto: Tämä muoto käsittää suoritettavan BIOS-tiedoston. Yleistä (Windows / MS DOS) muotoa voidaan käyttää asentamiseen mistä tahansa Windows- tai MS DOS ‑ympäristöstä.

Tiedostonimi: OptiPlex_7050_1.11.0.exe

Tiedoston koko: 17.29 MB

Varmista latauksen eheys vahvistamalla tarkistussumman arvo.

MD5: 3d9bb30f9a01db4e9f4dc03e2cf36103

SHA1: a5e03bb5d7667e1494930023c0dc80e1f91904d0

SHA-256: 7920b4861ba686f59abd2d11738aeda24d6336b15f111252aa5578efa22e83e6

Lataa .EXE

Korjaukset ja parannukset

Fixes:
- Addressed Auto Wake issue when system is turned off from boot menu.
- Addressed add-in card compatibility.
- Addressed PCIe compatibility.
- Fixed the issue where the Intel Fast Call feature does not start during boot. Fast call is a feature that enables the network infrastructure of IT departments to support secure access from the internet to the corporate network.
- Addressed missing setup page via remote connection.
- Fixed the TPM startup error under TPM enabled condition when the system resumes from sleep mode.
- Addressed string mismatch between application and BIOS setup.
- Addressed memory reduction issue.
- Fixed a potential issue where the system stops responding when an incorrectly formatted password is entered in the BIOS Security Manager (BIOS pre-boot password) screen.
- Fixed a potential issue with binary image measurement using the Linux UEFI shim boot loader.
- Update Intel ME Firmware to address security advisories INTEL-SA-00125 (CVE-2018-3655), Intel-SA-00131 (CVE-2018-3643 CVE-2018-3644) & INTEL-SA-00141 (CVE-2018-3657 CVE-2018-3658 CVE-2018-3616)
- Removed BIOS update option in DOS environment.
- Fixed the issue with data wipe feature in BIOS.

Enhancements:
- Updated Intel ME Firmware to address security advisories INTEL-SA-00112 (CVE-2018-3628 CVE-2018-3629 CVE-2018-3632) & INTEL-SA-00118 (CVE-2018-3627).
- Updated CPU microcode to address security advisory Intel Security Advisory INTEL-SA-00115. (CVE-2018-3639 & CVE-2018-3640).
- Added TPM PPI Bypass for Clear Command support.
- Enhanced system security.
- Improved system stability.
- Supports dust filter reminder feature.
- Enhanced BIOS Auto Recovery feature.

Asennusohjeet

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Dell OptiPlex 7050 System BIOS

Lataa tiedostoja

Korjaukset ja parannukset

Tärkeät tiedot

Yhteensopivat järjestelmät

Tuetut käyttöjärjestelmät

Asennusohjeet

Sovelletaan kohteeseen