LSI Logic PERC 4/Di, v.2.21, A04

hi testing

ID du pilote : R55705

Importance : En option

Version : 2.21, A04 Dernière version Version recommandée Version la plus récente et recommandée

Date de publication : 10 Feb 2003

Type de téléchargement : Micrologiciels

Catégorie : RAID SCSI

Firmware upgrade for PERC 4/Di

Télécharger les fichiers

Format de fichier : Les packages DUP (Dell Update Packages) au format Microsoft Windows 32 bits ont été conçus pour fonctionner sur les systèmes d’exploitation Microsoft Windows 64 bits. Les packages DUP (Dell Update Packages) au format Microsoft Windows 64 bits fonctionnent uniquement sur les systèmes d’exploitation Microsoft Windows 64 bits. Assurez-vous de choisir la mise à jour de pilote de périphérique adaptée à votre système d’exploitation.

Nom du fichier: RAID-FRMW-R55705.exe

Taille du fichier: 1.77 MB

Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.

MD5 : 34242ADA25D20D62AC73E645B9EC9C57

Télécharger .EXE

Format de fichier : Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur et double-cliquez dessus pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.

Nom du fichier: FW221.exe

Taille du fichier: 1001.17 KB

Télécharger .EXE

Correctifs et améliorations

Firmware Bug Fixes:
-------------------

Issues fixed with firmware version 2.21

1. When the capacity of logical drives are configured in excess of 1TB, the firmware would crash when using WebBios.

2. Tape backup failure encountered when performing appended backups with tape device attached to channel B of PERC 4/Di in RAID/SCSI mode.

3. Ocasionally when hot plugging a Maxtor hard drive a timing problem might be encountered, causing the drive to fail.

4. No progress bar for consistency check or initialization in (WebBios).

5. Firmware negotiation to U160 speed for U320 drives in PowerVault 220 is very slow.

6. Drives not negotiating back to original maximum transfer rate after SCSI chip reset.

7. Hot plugging a U320 drive in a Power Vault 220 and then performing a rescan using OpenManage Array Manager causes SCSI bus to hang.

8. When the battery reaches its maximum charge cycles, the firmware will stop monitoring battery, until the fast Charge counter is reset.

9. OS (W2K) hang during online volume expansion using OpenManage Array Manager.

Firmware Enhancements
---------------------

1. I/O Performance in general has been improved. Also Write back (reads & writes) caching improvements have been completed for RAID 0
and 1.

2. Write back cache flushing has been improved.

3. Improved the read/write performance in U320 drives.

4. Sequential read/write performance improvements for I/O size greater or equal than 64K in write back mode.

5. Multi LUN tape support added.

WebBios Bug Fixes
-----------------

Displays drive negotiated speed properly.

Instructions d’installation

Floppy Disk Boot to Disk for FW221.exe

Download

1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Hard Drive Floppy Disk Creation

1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.

Install

1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.

LSI Logic PERC 4/Di, v.2.21, A04

Télécharger les fichiers

Correctifs et améliorations

Systèmes compatibles

Systèmes d’exploitation pris en charge

Instructions d’installation