Dell Networking série N3000, version du micrologiciel 6.2.0.5, A05
Redémarrage requisInstalléCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Both Dell Networking N3000 and N2000 Series switches share the same firmware image file (N3000_N2000v6.2.0.5.stk). If your N3000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware version 6.2.0.5 as it contains multiple bug fixes and enhancements.
After upgrading the switch firmware version to 6.2.0.5, the boot code update is required on N3000 series switches via serial console if switch is running with the older boot code version. The latest boot code version available for N3000 series switches is “U-Boot SPL 2012.10-00078-g24e99ea (Jun 24 2014 - 16:41:18)"
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes".
Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.0.3 Firmware"
Recommandé
Vérifier la compatibilité
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit.Comment faire
Aucun résultat trouvé.Votre recherche n’a renvoyé aucun résultat. Veuillez modifier votre recherche, saisir une étiquette de service (B959FS3) ou un modèle (Latitude 5540) et réessayez.
Ce pilote n’est pas compatible
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
New Features & Enhancements: BGPv4 (N3000 and N4000 switches only through CLI) VRF-Lite (N3000 and N4000 switches only through CLI) Audio/Video Bridging (N4000 switches only through CLI) *IEEE 802.1as Timing and Synchronization *IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP) *IEEE 802.1ak Multiple Multicast Registration Protocol (MMRP) *IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP) RADIUS Change of Authorization (COA) IPv6 Router Advertisement (RA) Guard MLAG Enhancements *Virtual MAC address per MLAG domain Bidirectional Forwarding Detection (BFD) (N3000 and N4000 switches only through CLI) IP unnumbered VLAN interfaces Support Explicit Congestion Notification (ECN) capability Support to configure storm-control action Display PIM protocol statistics and multicast forwarding cache Link de-bounce hysteresis on physical interface link loss. Buffers command to configure CPU thresholds for messages
Fixes: CaseID Summary 835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored 845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log. 848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer 852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities 851807 N3048 - Console LED green in GUI even with no console cable attached to it. 856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable" 826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported 854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config 860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present. 862891 VRRP issue between SilverPeak and Dell N3000 852286 N-Series - PCI DSS Compliance 860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce. 826214 PC8164F - Ports down with PHY status as Not Supported 848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping 848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server 844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web. 813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr 848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not. 850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI 839620 N4032F Static IP Routing Issue. 790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer 838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6 873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x 870519 N3048P FW upgrade failure with "can't write fw_env to flash" message 844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7 877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK 859638 N3000 Series - Intermittent switch crash due to bad formatting argument
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes"
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Format de fichier :Extrait des fichiers directement vers le disque local
Nom du fichier :N3000v6.2.0.5a05.zip
Taille du fichier :22.99 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce format de fichier comprend une archive de fichiers qui peut être décompressée sur un répertoire du disque dur. L’installation peut être effectuée à partir de ce répertoire.
New Features & Enhancements: BGPv4 (N3000 and N4000 switches only through CLI) VRF-Lite (N3000 and N4000 switches only through CLI) Audio/Video Bridging (N4000 switches only through CLI) *IEEE 802.1as Timing and Synchronization *IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP) *IEEE 802.1ak Multiple Multicast Registration Protocol (MMRP) *IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP) RADIUS Change of Authorization (COA) IPv6 Router Advertisement (RA) Guard MLAG Enhancements *Virtual MAC address per MLAG domain Bidirectional Forwarding Detection (BFD) (N3000 and N4000 switches only through CLI) IP unnumbered VLAN interfaces Support Explicit Congestion Notification (ECN) capability Support to configure storm-control action Display PIM protocol statistics and multicast forwarding cache Link de-bounce hysteresis on physical interface link loss. Buffers command to configure CPU thresholds for messages
Fixes: CaseID Summary 835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored 845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log. 848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer 852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities 851807 N3048 - Console LED green in GUI even with no console cable attached to it. 856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable" 826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported 854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config 860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present. 862891 VRRP issue between SilverPeak and Dell N3000 852286 N-Series - PCI DSS Compliance 860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce. 826214 PC8164F - Ports down with PHY status as Not Supported 848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping 848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server 844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web. 813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr 848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not. 850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI 839620 N4032F Static IP Routing Issue. 790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer 838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6 873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x 870519 N3048P FW upgrade failure with "can't write fw_env to flash" message 844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7 877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK 859638 N3000 Series - Intermittent switch crash due to bad formatting argument
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes"
(1) Download the zip file - N3000v6.2.0.5a05.zip (2) Extract the image file "N3000_N2000v6.2.0.5.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.0.5 Firmware.pdf" extracted from zip file.
Reboot will be required
Vous rencontrez des problèmes de connexion au réseau et avez besoin d’aide ?
Trouvez une solution dans le guide de dépannage réseau de Dell.