Dell PowerVault 132T Tape Library, v.LTO-2 53Y3, A06

Custom Instructions for R103743.EXE:

Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.

Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to upzip the files (the default location is x:\dell\drivers\R103743).
4. Click on the OK button to extract files.
5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.

Installation
1. Locate the readme.htm file in the directory to which you unzipped the files. This file contains the installation instructions for the files listed below:

NOTE: x: represents the drive where the files were unzipped

PowerVault 132T LTO1 and LTO2 Tape Library Application Code 227D.GY002 located in x:\Dell\Drivers\R103743\Library\LTO
PowerVault 132T SDLT320 Tape Library Application Code 227D.GZ002 located in x:\Dell\Drivers\R103743\Library\SDLT
PowerVault 132T Remote Management Card Firmware 181F.00003 is located in x:\Dell\Drivers\R103743\RMU
PowerVault 132T LTO1 Tape Drive Firmware 36U3 located in x:\Dell\Drivers\R103743\LTO1 Drive
PowerVault 132T LTO2 Tape Drive Firmware 53Y3 located in x:\Dell\Drivers\R103743\LTO2 Drive
PowerVault 132T SDLT320 Tape Drive Firmware 5252 (V82) located in x:\Dell\Drivers\R103743\SDLT Drive
PowerVault 132T SNC (FC Bridge) Module Firmware 4.45.04 is located in x:\Dell\Drivers\R103743\SNC