Télécharger les fichiers
Format de fichier : Ce format de fichier se compose d’un fichier exécutable BIOS. Le format universal (Windows/MS DOS) peut être utilisé pour une installation à partir de tous les environnements Windows ou MS DOS.
Nom du fichier: PowerEdge_T30_1.0.15.exe
Taille du fichier: 8.48 MB
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 : 7bc9a689e73fd24306d02570d1bce045
SHA1 : e53cc4ad674944e7945b6ff657a892678b4c1dd7
SHA-256 : 3297886d1586c679f3dd39d10c109db36388a6f35e45b2c768e6dd4f1658a579
Format de fichier : Ce format est composé d’une archive de fichiers PDF pour fournir au client une assistance et des informations sur les procédures. Il est nécessaire d’installer d’abord Adobe Acrobat Reader avant de pouvoir afficher les fichiers de cette archive.
Nom du fichier: T30_BIOS 1.0.15_RN.PDF
Taille du fichier: 58.83 KB
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 : d02bef32a000d3ca5ca697826416200b
SHA1 : b0a286c7c9005bdd1b3bb5a7778501406e26cc8d
SHA-256 : 61d82612f775d1c357a963a1a1add4b93680b51102de0ddca63d8739773dfcdc
Correctifs et améliorations
Fixes
- Update Intel ME Firmware to address security advisories INTEL-SA-00125 (CVE-2018-3655), Intel-SA-00131 (CVE-2018-3643 CVE-2018-3644) & INTEL-SA-00141 (CVE-2018-3657 CVE-2018-3658 CVE-2018-3616)
Informations importantes
Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.
Systèmes d’exploitation pris en charge
Instructions d’installation
BIOS Update Executable for Windows/DOS
Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
--------------------------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.