Dell Latitude E7270/E7470 System BIOS

Redémarrage requis

Ne mettez pas l’ordinateur hors tension et ne le déconnectez pas de sa source d’alimentation pendant la mise à jour du BIOS, cela risquerait d’endommager votre ordinateur. Au cours de la mise à jour, l’ordinateur redémarre et il se peut que vous voyiez brièvement un écran noir.

Avant de procéder à la mise à jour, lisez les instructions d’installation et les informations importantes indiquées ci-dessous.

ID du pilote : WR9GJ

Importance : Critique

Version : 1.22.8, 1.22.8 Dernière version Version recommandée Version la plus récente et recommandée

Date de publication : 18 Oct 2019

Type de téléchargement : BIOS système

Catégorie : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel security advisories INTEL-SA-00213 and INTEL-SA-00233. The security advisory is a statement when a product is impacted by a security vulnerability and a remedy is available.

Télécharger les fichiers

Format de fichier : Ce format de fichier se compose d’un fichier exécutable BIOS. Le format universal (Windows/MS DOS) peut être utilisé pour une installation à partir de tous les environnements Windows ou MS DOS.

Nom du fichier: Latitude_E7x70_1.22.8.exe

Taille du fichier: 9.56 MB

Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.

MD5 : 1bd582c6c6d12b4f87e62f2e1800cab1

SHA1 : 4b8ebc2866c2b0f559b6ccf60c1306cc1b80a927

SHA-256 : 673868aa41466c98af0e910d16859e8ccc78cbc86a09364cdcef2a85c4e75d82

Télécharger .EXE

Correctifs et améliorations

Fixes:
- Removed the Pre-Boot Intel RST Manager Optimized Defaults option.
- Firmware updates to address security advisory INTEL-SA-00213 (CVE-2019-0086, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094 and CVE-2019-0096).
- Firmware updates to address security advisories INTEL-SA-00233(CVE-2018-12126, CVE-2018-12127, CVE-2018-12130 and CVE-2019-11091).
- Fixed the issue where the TPM setting may be unexpectedly enabled after loading the Custom User Settings in BIOS.
- Fixed the issue where the system boots to USB device directly, bypassing the password stage when an admin password is set.

Enhancements:
- Updated the Embedded Controller Engine firmware.
- Modified battery algorithm to prolong lifespan and minimize risk of swelling.

Instructions d’installation

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the file.
4. Click Yes to open the BIOS update utility.
5. Click Update to initiate the update process. A progress bar is displayed.
6. Click Restart to restart the system once the progress bar reaches 100%.
The update process initiates at the Dell logo and an update initiation message is displayed with a progress bar. After BIOS update finishes, system will auto reboot to take effect.

Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a progress bar at the Dell logo screen. The system restarts again when the update is complete.

Dell Latitude E7270/E7470 System BIOS

Télécharger les fichiers

Correctifs et améliorations

Systèmes compatibles

Systèmes d’exploitation pris en charge

Instructions d’installation

S'applique à