TelepítveEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
iDRAC 4.40.40.00
Ajánlott
Kompatibilitás ellenőrzése
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
Nincs találat.Nem találtunk semmit, amit keresne. Módosítsa a keresést arra, hogy szervizcímkét (B959FS3) vagy típust (Latitude 5540) ad meg, ezután pedig próbálja újra.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Fixes - Fixed an issue of storage oids (10892.5.5.1.x) are missing for 5 Hours after iDRAC9 reset. - Fixed an issue of RFS fails to disconnect after mounted file is unavailable. - Fixed an issue of unable to boot to iso image once the image is attached using redfish. - Fixed an issue of MX740c - NGM 1.2.1 - ESXi 6.7 U3 - iSM 3.51 & 3.6.0 active/not running.
Enhancements - Support for PM1733/PM1735 v2 drive. - Support for 1100W Titanium PSU. - Support for Changing the feature name of SMART to Chipset S.M.A.R.T Monitoring instead of SATA Supported Chipset. - Support for 75F3 CPU SKUs. - Support for VMWare 7.0 U2 on XE7420 and XE7440. - Support for AEP and 256GB LRDIMM on R840 and R940xa. - Support for System Erase with SEKM enabled. - Support for Single Socket chassis configuration in R6525. - Support for Ubuntu 20.04.2 on XE7420 and XE7440. - Support for A100 on R840 and R940xa. - Support for AMD wave 2 CPU's. - Support for A10 24GB 150W PCIe GPU (SW FHFL 150W NVFF5.0) card on R7525, R740xd and XE2420. - Support for SEKM support on XE7420 and XE7440. - Support for Pre-Enablement of 700W PSU on R6515. - Support for 1100W -48V DC PSU on R6525 and R7525. - Support for latest OS and Browsers.
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Fájlformátum:An archive of PDF files to provide help and procedural information to the customers
Fájlnév:iDRAC_4.40.40.00_ReleaseNotes_A00.pdf
Fájlméret:116.52 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Download 1. Click Download Now to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive. Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok