Fájlok letöltése
Fájlformátum: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
Fájlnév: OptiPlex_3060_1.1.4.exe
Fájlméret: 13.85 MB
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5: 2b0ddab4f98b0cf02974458d82032dd7
SHA1: 273f478c7126885260f156d71351e45a727f7a58
SHA-256: 4bf1b7735fdb9f1aa33d9aee7c18dfec1503e87842c3b264b69dc824f249d33c
Fixes & Enhancements
Fixes:
- Addressed an issue that SATA port number are not correct for Small Form Factor in SMBIOS (System Management BIOS) structure
- Addressed issue where the system takes long time to wake up in certain condition.
- Addressed issue where the "Auto On Time" function cannot work in certain AC lost condition .
Enhancements:
- Improved Dell Enhanced Pre-Boot System Diagnostics (ePSA) FAN test for Tower.
- Improved PCI Express compatibility.
- Updated Intel Reference Code to to v7.0.2E.50
- Updated Intel Manageability Engine Firmware to 12.0.2.1087.
Fontos tudnivalók
BIOS downgrade to version 1.0.20 or before is not allowable due to BIOS dependency
Támogatott operációs rendszerek
Telepítési utasítások
BIOS Update Executable for Windows
Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
--------------------------------------------------------------------------------
Note 1: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
A következőre vonatkozik:
OptiPlex 3060 System BIOS