Fájlok letöltése
Fájlformátum: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
Fájlnév: E5450A11.exe
Fájlméret: 8.6 MB
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5: 1c3816985676d6ec6054ae8327bf5330
SHA1: 29a85e12849207a9a93f30e3b05f0dbe07f9b3cf
SHA-256: 97a6792fea4fac20f3124dbc129c47bc1bae0b07365bbbe7e84d2462e5523540
Fixes & Enhancements
Fixes
- Resolved an Intel SSD detection issue during the Dell ePSA diagnostic process.
Enhancements
- Added normal security precaution.
- Enhanced hard disk master password algorithm.
- Upgraded Intel Management Engine firmware.
- Upgraded Intel CPU microcode.
- Upgraded Intel VBIOS.
Fontos tudnivalók
Important:
- It is not allowed to downgrade to BIOS A02(or below) due to security concern and stability concern.
- Only for use with systems with e-dock socket.
- We do not suggest you to downgrade BIOS version to A10 due to Intel Management Engine firmware downgrade restriction on A11 BIOS.
Támogatott operációs rendszerek
Telepítési utasítások
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Click "Apply","Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS system will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
A következőre vonatkozik: