Fájlok letöltése
Fájlformátum: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Fájlnév: LMT-512L9M-HM9110B_ZPE.exe
Fájlméret: 1.53 MB
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5: d29edc318f89536454ac8a0d13f98c1b
SHA1: fab4c62e8716ab9bf3d124dd1ea8908fc312c1f2
SHA-256: 1ce4a7fa0218b9b8996bff3f8088557394671144db678cd6d9b2314f9d02501d
Fixes & Enhancements
- Improved the compatibility with Self-Monitoring, Analysis, and Reporting Technology System (SMART) tool.
Fontos tudnivalók
It is recommended that you back up your data before performing this update. Do not interrupt your system during the firmware upgrade process. If the firmware upgrade process is interrupted, the solid-state drive may not function properly.
Támogatott operációs rendszerek
Windows 7 (32 bites)
Windows 7, 64-bit
Windows 8 (32 bites)
Windows 8, 64-bit
Windows 8.1 (32 bites)
Windows 8.1 (64 bites)
Telepítési utasítások
Firmware upgrade through the Windows utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Run the utility to start the firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then click Update.
The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding.
3. Click OK to proceed.
Firmware upgrade proceeds. When the firmware upgrade process completes, you are prompted to reboot the system.
4. Close all open applications, and save your work before rebooting the system.
The system reboots and loads the firmware. Once the firmware update is complete, a message saying the firmware update done is displayed.
5. Sign in to the operating system.
6. To confirm that the firmware update was successful, open Device manager > open SSD> click Properties> choose hardware ID under Details and check the firmware version.
Firmware upgrade through the DOS utility
Note: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Procedure
1. Go to the DOS subdirectory.
2. Insert a blank CD into the optical drive.
3. Copy the ISO image into the blank CD.
4. Insert the CD (created from the above steps) into the optical drive of the system.
5. Boot your system from the optical drive.
6. Select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. Click Y to proceed.
8. After the upgrade is completed, you are prompted to reboot the machine. Remove the CD and reboot your system.
9. Open Device manager > open SSD > click Properties > choose hardware ID under Details and check the firmware version to confirm that the firmware update was successful.
A következőre vonatkozik:
LITEON L9M mSATA 512G SSD