Fájlok letöltése
Fájlformátum: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
Fájlnév: OptiPlex_3040_1.4.6.exe
Fájlméret: 5.52 MB
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5: 10cb07718feda60ac82b64272fd8431f
SHA1: 8ef2c031937807e56f808605fe02f3c39684cd6d
SHA-256: a49c178feaa073368f23dbb432eac1b41e061d9069c4c558c2e334442b7c5e91
Fixes & Enhancements
Fixes
-Addressed fan operates abnormal after resume from sleep mode.
-Addressed Dell logo shows abnormal with onboard VGA when external graphic card is available.
-Addressed DP/HDMI operates abnormal.
-Addressed specific USB mouse is not functional after system resumed from Sleep by the mouse
Enhancements
-Improve acoustic of fan.
-Improved available memory size for system using 4GB or more RAM on Windows 7 32-bit.
-Improved system security.
-Improved system stability for system power on.
Támogatott operációs rendszerek
Telepítési utasítások
BIOS Update Executable for Windows/DOS
Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.
--------------------------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
A következőre vonatkozik:
OptiPlex 3040 System BIOS