Riavvio richiestoInstallatoQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.3.1.13); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.3.1.13). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.3.1.13.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.3.1.13). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.3.1.13_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking 8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.3.1.13 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.3.1.13) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.3.1.13). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Consigliato
Verifica la compatibilità
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca per inserire il codice di matricola (B959FS3) o il modello (Latitude 5540) e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
Fixes: 1071696 - Unable to copy files from tftp server to application area of the switch. 1085660 - Missing SNMP OID's in v6.3.0.x PSE036473/PSE037185 - Switch crash with ARP Timer and emWeb tasks PSE036768 - N3000 Switch crashes "lldpTask" when it receives LLDP packet with TLV length of 75 PSE032494/PSE035915 - N4032F - VLAN Configurations missing after save and reload. PSE037246,PSE036993,PSE037018,PSE037343 - SSH stops responding after few weeks 1107646 - N4000-Stack Master crash with kernel panic - not syncing: Fatal exception 1111885/1108518 - 6.3.1.11-N4064F Stack member goes unresponsive with soft lockup errors 1111824 - N4k Console lock after 10 days of runtime on the 12 unit stackPSE036522 - N4000-6.3.0.x/6.3.1.8-Out of band interface takes an incorrect gateway IP address PSE037200 - Username "hivemanager" shows in the running config after upgrade from 6.2.6.6 1108121 - 6.3.1.10 - N4000 Stack master crash with "traptask" when flapping interface 1108189 - 6.3.1.11 - N4000 Stack master crash with "SNMPTraptask" when flapping interface for few minutes
Dell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Formato file:Estrae file direttamente sul disco locale
Nome file:PC8100v6.3.1.13a25.zip
Dimensioni file:54.72 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo formato di file è costituito da un archivio di file che possono essere decompressi in una directory sul disco rigido. L'installazione può essere quindi eseguita da tale directory.
Fixes: 1071696 - Unable to copy files from tftp server to application area of the switch. 1085660 - Missing SNMP OID's in v6.3.0.x PSE036473/PSE037185 - Switch crash with ARP Timer and emWeb tasks PSE036768 - N3000 Switch crashes "lldpTask" when it receives LLDP packet with TLV length of 75 PSE032494/PSE035915 - N4032F - VLAN Configurations missing after save and reload. PSE037246,PSE036993,PSE037018,PSE037343 - SSH stops responding after few weeks 1107646 - N4000-Stack Master crash with kernel panic - not syncing: Fatal exception 1111885/1108518 - 6.3.1.11-N4064F Stack member goes unresponsive with soft lockup errors 1111824 - N4k Console lock after 10 days of runtime on the 12 unit stackPSE036522 - N4000-6.3.0.x/6.3.1.8-Out of band interface takes an incorrect gateway IP address PSE037200 - Username "hivemanager" shows in the running config after upgrade from 6.2.6.6 1108121 - 6.3.1.10 - N4000 Stack master crash with "traptask" when flapping interface 1108189 - 6.3.1.11 - N4000 Stack master crash with "SNMPTraptask" when flapping interface for few minutes
(1) Download the zip file - PC8100v6.3.1.13a25.zip (2) Extract the image file "N4000v6.3.1.13.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.3.1.13 Firmware.pdf" extracted from zip file.
Hai bisogno di assistenza per i problemi di connessione di rete?
Trova una soluzione nella guida alla risoluzione dei problemi di rete di Dell