Non spegnere il computer o scollegarlo dall'alimentazione durante l'aggiornamento del BIOS in quanto potrebbe danneggiarsi. Durante l'aggiornamento, il computer verrà riavviato e verrà visualizzata brevemente una schermata nera.
Prima di aggiornare, leggere le istruzioni di installazione e le informazioni importanti riportate di seguito.
Dell Vostro 24-5460 Intel 6th Generation Processor System BIOS
Riavvio richiestoInstallatoQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
This package contains the Dell system BIOS update for Dell Vostro 5460 system that runs the Windows operating system. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices. This update addresses the security advisory INTEL-SA-00185.
Consigliato
Verifica la compatibilità
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca per inserire il codice di matricola (B959FS3) o il modello (Latitude 5540) e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Dell Technologies consiglia vivamente di eseguire questo importante aggiornamento il più presto possibile. L'aggiornamento contiene modifiche e correzioni di bug fondamentali per migliorare la funzionalità, l'affidabilità e la stabilità del sistema Dell. Inoltre è possibile che includa correzioni di sicurezza e altri miglioramenti di funzioni.
Formato file:File eseguibile BIOS CPG per Windows/DOS
Nome file:Vostro_24-5460_1.7.0.EXE
Dimensioni file:7.2 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo formato di file è costituito da un file eseguibile dal BIOS. Il formato universale (Windows/MS DOS) può essere utilizzato per l'installazione in qualsiasi ambiente Windows o MS DOS.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Run the BIOS update utility from Windows environment.
Download and Installation 1. Click Download File. 2. Click Save to save the file to your hard drive 3. Browse to the location where you downloaded the file and double-click the new file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Run the BIOS update utility from DOS environment (Non-Windows users)
Installation Note: You must provide a bootable USB drive. This executable file does not create the DOS system files. 1. Copy the downloaded file to a bootable USB drive. 2. Power on the system and then Press the F12 key. 3. Select USB Storage Device and boot to the DOS prompt. 4. Run the file by typing following command. For example: C:\ Precision_5530_X.Y.Z.exe Where C is the drive letter of the USB device where the executable file is located and Precision_5530_X.Y.Z.exe is the name of the downloaded file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option Disabled) 1. Copy the downloaded file to a bootable DOS USB drive. 2. Power on the system and then go to BIOS Setup by pressing the F2 key. 3. Go to General > Boot Sequence > Boot > Boot List Option. 4. Change UEFI to Legacy of Boot List Option. 5. Go to Exit > Save Changes and reboot system. 6. Press F12 and then select USB Storage Device and boot to the DOS prompt. 7. Run the file by typing the file name. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again. 8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option. 9. Change Legacy to UEFI Boot Option. 10. Go to Exit > Save Changes and reboot the system.
Hai bisogno di assistenza per i problemi del BIOS?
Trova una soluzione nella guida alla risoluzione dei problemi del BIOS di Dell