Non spegnere il computer o scollegarlo dall'alimentazione durante l'aggiornamento del BIOS in quanto potrebbe danneggiarsi. Durante l'aggiornamento, il computer verrà riavviato e verrà visualizzata brevemente una schermata nera.

Prima di aggiornare, leggere le istruzioni di installazione e le informazioni importanti riportate di seguito.

Dell Precision 7820/7920 Tower System BIOS

Riavvio richiesto Installato Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisories INTEL-SA-00125, INTEL-SA-00131, and INTEL-SA-00141. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
Consigliato

Verifica la compatibilità

Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema

Inserisci il modello o il codice di matricola Dell

Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere

Questo driver non è compatibile

Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.

Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.

Correzioni e miglioramenti

Fixes:
- Fixed the Trusted Platform Module (TPM) configuration where a startup error is displayed after system resumes from sleep state.
- Fixed the issue where the system stops responding when an incorrectly formatted password is entered at the BIOS Security Manager (BIOS preboot password) prompt.
- Firmware updates to address the Intel Security Advisories INTEL-SA-00125 (CVE-2018-3655), INTEL-SA-00131 (CVE-2018-3643 and CVE-2018-3644), and INTEL-SA-00141 (CVE-2018-3657, CVE-2018-3658 and CVE-2018-3616).
- Fixed the issue where incorrect information of PCIe storage device is displayed in BIOS setup menu in Dell Precision 7820 Tower.

Enhancements:
- Added new BIOS Password feature Master Password Lockout
Più dettagli

Versione

1.7.1, 1.7.1

Data di rilascio

08 ago 2018

Tipo di download

BIOS del sistema

Categoria

BIOS

Importanza

Critico
Dell Technologies consiglia vivamente di eseguire questo importante aggiornamento il più presto possibile. L'aggiornamento contiene modifiche e correzioni di bug fondamentali per migliorare la funzionalità, l'affidabilità e la stabilità del sistema Dell. Inoltre è possibile che includa correzioni di sicurezza e altri miglioramenti di funzioni.
Formati disponibili Visualizza le informazioni importanti

Formato file: Eseguibile flash BIOS
Nome file: 7X20T_1.7.1.exe
Dimensioni file: 9.9 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo formato di file è costituito da un file eseguibile dal BIOS. Per aggiornare il sistema, scaricare il file e salvarlo sul desktop o sul disco rigido, quindi eseguire il file eseguibile. Per aggiornare il BIOS, il sistema deve essere collegato all'alimentazione CA e deve presentare un livello di carica della batteria di almeno il 10%.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
c27aac02060c10a91c502c65a0beccec
SHA1:
b108de54277c5ef73efe771c163790a68e014ce7
SHA-256:
c9d99df67fb71df61dcb5b31b46f803a2c4366d2b2dcee8525025336dca9c8b9

Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)

Ulteriori dettagli

Mostra tutto | Nascondi tutto
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Dell Precision 7820XLT BIOS
Dell Precision 7920XLT BIOS
Dell Precision T7820 BIOS
Dell Precision T7920 BIOS
Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
8. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
9. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Save Changes and reboot the system.

Hai bisogno di assistenza per i problemi del BIOS?

Trova una soluzione nella guida alla risoluzione dei problemi del BIOS di Dell

Tutorial e guida ai driver