Dell Networking N2000 Series, Firmware Version 6.2.0.5,A05

再起動が必要です 取り付け済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。
このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
Both Dell Networking N2000 and N3000 Series switches share the same firmware image file (N3000_N2000v6.2.0.5.stk). If your N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware 6.2.0.5 as it contains multiple bug fixes.

After upgrading the switch firmware version to 6.2.0.5, the boot code update is required on N2000 series switches via serial console if switch is running with the older boot code version. The latest boot code version available for N2000 series switches is “U-Boot SPL 2012.10-00078-g24e99ea (Jun 24 2014 - 16:41:18)"

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes".

Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.0.5 Firmware"
推奨

互換性の確認

製品の詳細をご入力いただき、お使いのシステム用の最新のドライバー情報を表示してください

Dellのサービス タグまたはモデルを入力してください

お使いの製品を検索しますか?製品IDを入力してください。 手順を表示

このドライバーは互換性がありません

このドライバーは、選択した製品には適用されません。別の製品を選択してこのドライバーを使用する製品の詳細を再入力するか、製品サポート ページにアクセスして別の製品のすべてのドライバーを確認してください。

その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。

修正と強化

New Features & Enhancements:
BGPv4 (N3000 and N4000 switches only through CLI)
VRF-Lite (N3000 and N4000 switches only through CLI)
Audio/Video Bridging (N4000 switches only through CLI)
*IEEE 802.1as Timing and Synchronization
*IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP)
*IEEE 802.1ak Multiple Multicast Registration Protocol (MMRP)
*IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP)
RADIUS Change of Authorization (COA)
IPv6 Router Advertisement (RA) Guard
MLAG Enhancements
*Virtual MAC address per MLAG domain
Bidirectional Forwarding Detection (BFD) (N3000 and N4000 switches only through CLI)
IP unnumbered VLAN interfaces
Support Explicit Congestion Notification (ECN) capability
Support to configure storm-control action
Display PIM protocol statistics and multicast forwarding cache
Link de-bounce hysteresis on physical interface link loss.
Buffers command to configure CPU thresholds for messages

Fixes:
CaseID Summary
835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored
845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log.
848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer
852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities
851807 N3048 - Console LED green in GUI even with no console cable attached to it.
856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable"
826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported
854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config
860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present.
862891 VRRP issue between SilverPeak and Dell N3000
852286 N-Series - PCI DSS Compliance
860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce.
826214 PC8164F - Ports down with PHY status as Not Supported
848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping
848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server
844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web.
813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr
848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not.
850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI
839620 N4032F Static IP Routing Issue.
790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer
838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6
873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x
870519 N3048P FW upgrade failure with "can't write fw_env to flash" message
844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7
877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK
859638 N3000 Series - Intermittent switch crash due to bad formatting argument

Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes"
詳細を見る

バージョン

6.2.0.5, A05

リリース日:

10 3月 2015

ダウンロード タイプ

ファームウェア

カテゴリ

ネットワーク

重要度

推奨
デル・テクノロジーズでは、次に予定されているアップデート時に、このアップデートを適用することをお勧めします。このアップデートには、システム全体の正常性を維持するための変更が含まれています。これにより、システム ソフトウェアが最新の状態に保たれるとともに、システム ソフトウェアと他のシステム モジュール(ファームウェア、BIOS、ドライバー、ソフトウェア)との互換性が維持されます。また、その他の新機能が追加される場合もあります。
利用可能な形式 重要な情報を表示

ファイル形式: ローカルディスクに直接ファイルを解凍
ファイル名: N2000v6.2.0.5a05.zip
ファイルサイズ: 22.99 MB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
フォーマットの説明:
このファイル形式は、ハードドライブ上のディレクトリに解凍できるファイルのアーカイブです。このディレクトリからインストールを行うことができます。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
6fbab2e08d6fbba06e209200cc72bace
SHA1:
fa6c885ebe80f8355ff7170a9f6d3b6ec5f2e701
SHA-256:
077ba2c7e76fc66d30451453b090a6fc2ff2f9f5d74ad49e82f0a78d4234a16c

ファイル形式: お客様にとって便利な修正点、および機能拡張に関する情報を含むテキストファイル
ファイル名: N2000ReadMev6.2.0.5a05.txt
ファイルサイズ: 3.17 KB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
フォーマットの説明:
このファイル形式には、標準的なテキストエディタで表示できるプレーンテキストが含まれています。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
2b81615225fb21c1c3dd7c83b022646e
SHA1:
19052bdca95d2a5e7a6bfcea0a1ae1a5e7add604
SHA-256:
42553d476013d9648e8f094f3a67c5f2060fa16090e208d54d9ab86d6aad5ab8

ダウンロードすることによって、Dellソフトウェア製品ライセンス契約 (英語で) の条項に同意したことになります。

New Features & Enhancements:
BGPv4 (N3000 and N4000 switches only through CLI)
VRF-Lite (N3000 and N4000 switches only through CLI)
Audio/Video Bridging (N4000 switches only through CLI)
*IEEE 802.1as Timing and Synchronization
*IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP)
*IEEE 802.1ak Multiple Multicast Registration Protocol (MMRP)
*IEEE 802.1Qat Multiple Stream Reservation Protocol (MSRP)
RADIUS Change of Authorization (COA)
IPv6 Router Advertisement (RA) Guard
MLAG Enhancements
*Virtual MAC address per MLAG domain
Bidirectional Forwarding Detection (BFD) (N3000 and N4000 switches only through CLI)
IP unnumbered VLAN interfaces
Support Explicit Congestion Notification (ECN) capability
Support to configure storm-control action
Display PIM protocol statistics and multicast forwarding cache
Link de-bounce hysteresis on physical interface link loss.
Buffers command to configure CPU thresholds for messages

Fixes:
CaseID Summary
835383 N30XX v6.1.1.7 port-channel goes down when primary link is restored
845096 N3048P-Temperature sensor read failure, POE Controller X " error message in log.
848723 Inconsistent error message b/w Web GUI and CLI for GARP Join Timer
852290 6.1.2.1 - N-Series - Multiple OpenSSH Vulnerabilities
851807 N3048 - Console LED green in GUI even with no console cable attached to it.
856280 6.1.2.1 - MLAG SNMP MIB Walk result is incomplete for "agentVpcPeerMemberStatusTable"
826214 6.1.0.6/5.1.4.5 - PC8164F - Ports down with PHY status as Not Supported
854303 6.1.2.1 - N2048P: VLAN 1 IP address/mask from easy setup wizard not saved in config
860196 N2000 - Unicast traffic to flood in the VLAN even if a Valid FDB entry is present.
862891 VRRP issue between SilverPeak and Dell N3000
852286 N-Series - PCI DSS Compliance
860642 N2000 (6.1.1.7) port security - "Dynamic Address Count" of port security configured interface won't reduce.
826214 PC8164F - Ports down with PHY status as Not Supported
848902 N20xx/N30xx v6.1.1.7 IP address range issue with DHCP Snooping
848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server
844718 Error shown while adding SNTP server address if fourth octet address range is from 224-239 from web.
813018 PCM8024-k v5.1.4.5 SNMP traps with wrong agent-addr
848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not.
850860 N2048 - Port display & config error when configuring bridge multicast group with Web UI
839620 N4032F Static IP Routing Issue.
790392 Switch stops responding to Serial console, Telnet, SSH and WebUI when session is dropped during file transfer
838304 N2000 - IPv6 DHCP address assignment doesn't work while IPv6 MLD snooping is enabled on the 6.1.0.6
873601 6.1.2.4 - N4032F - IS-IS Multicast traffic not forwarded after upgrading from FW v5.x to v6.x
870519 N3048P FW upgrade failure with "can't write fw_env to flash" message
844718 N2000/N3000 Can not add SNTP server if fourth octets ip address is range of 224-239. 6.1.1.7
877317 N3000 Series - 6.1.2.4: Fan unit pull/insert not detected and fan status always shows OK
859638 N3000 Series - Intermittent switch crash due to bad formatting argument

Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.0.5_Release_Notes"
Dell N2024
Dell N2024P
Dell N2048
Dell N2048P
(1) Download the zip file - N2000v6.2.0.5a05.zip
(2) Extract the image file "N3000_N2000v6.2.0.5.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.0.5 Firmware.pdf" extracted from zip file.

ネットワーク接続の問題についてサポートが必要ですか?

Dellのネットワーク トラブルシューティング ガイドでソリューションを見つける

ドライバのヘルプとチュートリアル