PowerConnect M6220, Firmware Version v5.1.3.7,A36

Release 5.1.3.7 contains fixes for the following issues:

622897 PC8024 - SNMP Product Status OID does not change after a fan/power failure
660307 PC6248P - No Receive Discards counter available
674190 PC8100 - Stack member unit crash with task "hapiMcAsyncTask"
679802 PC7024 - Software routing when using secondary SVI
680596 SNMP OID not incrementing snmpEngineBoots value
687093 nimTask crash on PC8024 stack while routing traffic with OSPF enabled
690946 4x M8024-k switches, one intermittently doesn't join a stack after reboot from CLI
705979 dot1sBpduReceive(): Discarding the BPDU, cannot get buffer from buff pool
707212 8100 stack member reboots with task bcmRPC. Firmware 5.1.1.7
708516 PC81xx - IPMapForwardingTask and Interrupt Thread crashing switch 5.1.1.7
709801 M8024k - Error with temperature status reporting
712702 Using WebUI to set fields Dynamic VLAN creation and GVRP Registration issue
713435 OpenSSH Vulnerability Issue - Fix for: CVE-2012-0814
716307 crashdump - (null) XXXXX - possibly SSH related
722543 After failover vlan is getting associated with physical interface.
722543 After failover the spanning-tree status of the physical interface is transitioned from discarding to forwarding.
726597 Source MAC address from LLDP frames learned in bridge address table
728001 PC8100 - WebUI showing medium temp, while the CLI was showing good temp.
734385 MIB Walk on M6348 and M8024-K running latest firmware not returning the same results (5.1.2.3)
735710 PC81xx - Switch crash when VRRP configuration applied.
749137 IPv6 PIM Multicast traffic stops working with MFC-V6 error messages