Dell Optiplex 160 System BIOS, A07
BIOSのアップデート中に、PCの電源をオフにしたり、コンセントを外したりしないでください。PCに障害が発生する可能性があります。アップデート中にPCが再起動し、一時的に黒い画面が表示されることがあります。
アップデートする前に、インストール手順と以下に記載されている重要な情報をお読みください。
アップデートする前に、インストール手順と以下に記載されている重要な情報をお読みください。
hi testing
ドライバーID : R277841
重要度 : 推奨
バージョン : A07, A07 最新バージョン 推奨バージョン 最新および推奨バージョン
リリース日 : 29 8月 2010
ダウンロード タイプ : システムBIOS
カテゴリ : BIOS
160 A07 BIOS
ファイルをダウンロードする
ファイル形式: このファイル形式は、BIOS実行ファイルで構成されています。ユニバーサル(Windows/MS DOS)形式を使用することで、あらゆるWindows環境やMS DOS環境でインストールできます。
ファイル名: O160-A07.exe
ファイルサイズ: 1.26 MB
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5: d62a33318d8149632c588376c38e7cdb
ファイル形式: このファイル形式は、BIOS実行ファイルで構成されています。この形式は、Linuxでのインストールに使用できます。
ファイル名: O160-A07.HDR
ファイルサイズ: 1 MB
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5: 7778116dae21a60fa9a7d34c6b3d9469
修正と強化
Enhanced compatibility between chipset,duo core processor and Windows 7 OS.
互換性のあるシステム
サポート対象のオペレーティングシステム
BIOS
インストール手順
Custom Instructions for O160-A07.HDR:
Installation Instructions for Linux
- Command Line BIOS Updates:
If you wish to update the BIOS from the command line, you should turn off
Turn off 'automatic' BIOS updates in the BIOS Update from USB tool.
a) Computer -> More Applications -> Configure BIOS Update from USB
b) Select "No action" under "Action on USB Key insertion"
1) plug in USB key w/BIOS .HDR
The usb key is normally mounted under /media/KEYNAME, where KEYNAME is
the filesystem label on the key. If there is no label, it is usually mounted
under /media/disk. (See step #3 to find the mountpoint if unsure)
2) Computer -> More Applications -> X Terminal
3) $ ls -l /media
You should see a directory here where the key is automatically mounted.
4) $ sudo run-admin xterm
a new xterm window will open up as root. Run the following commands
in the new window:
5) # /sbin/modprobe dell_rbu
6) # /usr/sbin/dellBiosUpdate -u -f /media/KEYNAME/BIOS_FILENAME.HDR
- GUI BIOS Updates:
1) You can configure the GUI as follows:
a) Computer -> More Applications -> Configure BIOS Update from USB
2) The following configuration options are available:
a) (default) "Automatic update": This option updates the BIOS when a USB key
is detected with a matching BIOS for your system that is newer than the
current BIOS. No GUI options are displayed. You can view the output of
the BIOS update operation by looking at the log files:
/var/log/bios-output.txt and /var/log/bios-errout.txt
b) "Ask": This option will pop up a dialog when a USB key is detected with a
matching BIOS for your system that is newer than the current BIOS.
c) "No action": Do nothing when a USB key is inserted with applicable BIOS updates.
d) "Automatic Reboot"/"Don't Reboot": These options control system reboot after
BIOS update. You must reboot the system to have the BIOS update take effect.
3) To utilize either "automatic update" or "ask" mode, simply copy the BIOS .HDR
file to the root directory of a USB key and attach it to your system.
Custom Instructions for O160-A07.exe:
Installation Instructions for the Universal (Windows/ DOS) format
1. Download file to Desktop
2. Use one of the methods below to flash the Bios.
. Run the BIOS update utility from Windows environment
. Run the BIOS update utility from DOS environment (Non-Windows users)
--------------------------------------------------------------------------------
Download file to Desktop
The file O160-A07.EXE is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.
The File Download window appears.
2. Click the Save button.
The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.
A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O160-A07.EXE.
The BIOS Flash window appears.
2. Click the Continue button.
The message Pressing Yes will close all applications, shut down Windows, Flash the BIOS, then reboot. appears.
3. Click the Yes button.
The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a DOS bootable USB storage device. This executable file does not create the DOS system file
Installation Instructions for Linux
- Command Line BIOS Updates:
If you wish to update the BIOS from the command line, you should turn off
Turn off 'automatic' BIOS updates in the BIOS Update from USB tool.
a) Computer -> More Applications -> Configure BIOS Update from USB
b) Select "No action" under "Action on USB Key insertion"
1) plug in USB key w/BIOS .HDR
The usb key is normally mounted under /media/KEYNAME, where KEYNAME is
the filesystem label on the key. If there is no label, it is usually mounted
under /media/disk. (See step #3 to find the mountpoint if unsure)
2) Computer -> More Applications -> X Terminal
3) $ ls -l /media
You should see a directory here where the key is automatically mounted.
4) $ sudo run-admin xterm
a new xterm window will open up as root. Run the following commands
in the new window:
5) # /sbin/modprobe dell_rbu
6) # /usr/sbin/dellBiosUpdate -u -f /media/KEYNAME/BIOS_FILENAME.HDR
- GUI BIOS Updates:
1) You can configure the GUI as follows:
a) Computer -> More Applications -> Configure BIOS Update from USB
2) The following configuration options are available:
a) (default) "Automatic update": This option updates the BIOS when a USB key
is detected with a matching BIOS for your system that is newer than the
current BIOS. No GUI options are displayed. You can view the output of
the BIOS update operation by looking at the log files:
/var/log/bios-output.txt and /var/log/bios-errout.txt
b) "Ask": This option will pop up a dialog when a USB key is detected with a
matching BIOS for your system that is newer than the current BIOS.
c) "No action": Do nothing when a USB key is inserted with applicable BIOS updates.
d) "Automatic Reboot"/"Don't Reboot": These options control system reboot after
BIOS update. You must reboot the system to have the BIOS update take effect.
3) To utilize either "automatic update" or "ask" mode, simply copy the BIOS .HDR
file to the root directory of a USB key and attach it to your system.
Custom Instructions for O160-A07.exe:
Installation Instructions for the Universal (Windows/ DOS) format
1. Download file to Desktop
2. Use one of the methods below to flash the Bios.
. Run the BIOS update utility from Windows environment
. Run the BIOS update utility from DOS environment (Non-Windows users)
--------------------------------------------------------------------------------
Download file to Desktop
The file O160-A07.EXE is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.
The File Download window appears.
2. Click the Save button.
The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.
A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O160-A07.EXE.
The BIOS Flash window appears.
2. Click the Continue button.
The message Pressing Yes will close all applications, shut down Windows, Flash the BIOS, then reboot. appears.
3. Click the Yes button.
The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a DOS bootable USB storage device. This executable file does not create the DOS system file