Intel SpeedStep Driver

1. Dual-Core Pentium-M processors are supported in single-core mode only.
2. Intel SpeedStep cannot be used with the processor in dual-core mode.
3. Setting single-core/dual-core is possible in the computer's BIOS Setup program, and must be done prior to installation of Windows 2000.

Hard Drive Installation (via WinZip) with Setup.exe File for R112248.EXE

Download

1.Click Download File to download the file.
2.When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
3.From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file icon appears on your desktop.

Install

1.Double-click the new icon on the desktop labeled R112248.EXE.
2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R112248. Write down this path so the executable (I.e. Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R112248 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.