ファイルをダウンロードする
ファイル形式: このファイル形式は、BIOS実行ファイルで構成されています。ユニバーサル（Windows/MS DOS）形式を使用することで、あらゆるWindows環境やMS DOS環境でインストールできます。
ファイル名: 5323A18.exe
ファイルサイズ: 5.43 MB
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5: 98d10ea7b3c5960418b7c4ba4c481a01
SHA1: 57c54e26b645909082a470a10f0f94e91bca4666
SHA-256: f36e9d71aa1b264fc6908aa5bad144c93de8648b979942a16b5b2ff5b3a2898a
修正と強化
Fixes
- Not Applicable
Enhancements
- Added support for Win8.1
重要な情報
Follow the instructions after running the Setup.exe. See the Installation Instructions category for additional details.
インストール手順
BIOS Update Executable for Windows/DOS
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required