Dell Networking N4000 Series, Firmware Version 6.2.6.6,A08

재시작 필요 설치 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.
이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Both Dell Networking N4000 Series switches and Dell PowerConnect 8100 Series shares the same firmware image version (for example., N4000v6.2.6.6.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.2.6.6). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.6.6_Release_Notes".

Please follow software update instructions included in the zip file - "Upgrading Dell Networking N4000 Series Switches From Version 6.x.x.x to 6.2.6.6 Firmware.pdf".

Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.2.6.6) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.2.6.6). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
권장 사항

호환성 확인

시스템의 최신 드라이버 정보를 보려면 제품 세부 정보를 입력해 주십시오.

Dell 서비스 태그 또는 모델 입력

제품을 찾아보고 싶으십니까? 제품 식별자를 입력해 주십시오. 방법 보기

이 드라이버는 호환되지 않음

이 드라이버는 선택한 제품에 적용할 수 없습니다. 다른 제품을 선택하여 이 드라이버에 대한 제품 세부 정보를 다시 입력하거나 제품 지원 페이지를 방문하여 다른 제품의 모든 드라이버를 확인해 주십시오.

추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.

수정 또는 개선한 내용

New Features & Enhancements:
Added lower-case dot1x MAB user-name/password support to radius-server
Added ssh public key authentication support
Added TLSv1.0 as HTTPS protocol by default and disabled SSLv2 and SSLv3 by default
Kernel updates and SSL version upgrade to 1.0.1.o
PoE Controller firmware updated to 265_1

Fixes:
954419 - N4000 - 6.2.6.5 - Stack member crash "hapiMcAsyncTask"
954364 - N4000 - 6.2.6.5 - Stack member crash "hapiRxTask"
948955 - N-Series - 6.2.6.3 - Incorrect Dynamic MAC Address-table entry for Data-VLAN
939744 - N-Series-6.2.1.6-ip ospf and rip authentication encrypt string is showing in clear-text
939170 - N-Series - 6.2.1.6 - RSTP BPDU packet dropped if hello timer mismatch
936925 - N-Series-6.2.1.6 -Layer3 interface (vlans) stays down when stack master is powered off abruptly
936580 - N4000 - 6.2.1.6 -Switch stack unresponsive with mcastMapTask crash logs
936193 - N-Series - Observed "LLDP entry delete failed" log messages
934566 - N-Series-6.2.1.6-show buffers command shows incorrectly spaced or garbled output via telnet/SSH
934053 - N-Series - 6.2.1.6 - BGP AS Number Range (Unassigned by IANA)
927589 - N3000-6.2- IPv6 neighbor solicitation multicast not distributed to non-management stack members
927035 - N2048P - 6.2.0.5 - PoE interoperability issue with D-Link PoE Splitter
926627 - N-Series - 6.2.1.6 - Multiple vulnerabilities (CVE-2011-3389, CVE-2013-2566 and CVE-2015-2808)
926109 - N-Series - 6.2.1.6 - Port-security violation is not logged for ports with Sticky MAC enabled
923480 - N-Series - 6.2.1.5 - Port-Security (Sticky MAC) with voice VLAN is not working as expected
923462 - N-Series - 6.2.1.5 - Ports stop learning dynamic MAC address after disabling sticky MAC
921359 - N-Series - 6.2 - dot1x unauth-vlan not working with authentication order enabled
920185 - N3000 - 6.2 - Front 10G ports goes down when 10G SFP extension module is removed from the slot
914354 - N4000 - 6.2.0.5 - IPv6 Multicast not filtered by MLAG Peer-Link
913185 - N2000 - Switchport is not removed from unauth VLAN even after passing dot1x authentication.
913140 - N3000 - MLAG/LACP issue "Error allocating buffer pools for the received dot3ad data message"
907751 - N4000-6.2.0.5 - emWeb crash when Nessus Scan perform SSH login with Radius auth
890635 - N2000-6.1.2.4 - SNMP MIB Walk OID "1.3.6.1.4.1.674.10895.3000.1.2.100" returns URL http://0.0.0.0
859610 - N3000 - ssh public key authentication doesn't work
813685 - N3000 -IPV6 USGv6 Interoperability and Basic Conformance failures
939526 - N40xx - Stacked and running RPVST is often unable to learn GARP address after failover.
918049 - N20xx - 6.2.1.2 - SSH Radius authentication fails on first attempt
907697 - N20xx -6.1.2.4-dot1x mac based authentication,clients behind phones can't forward traffic
937583 - N40xxF - 6.2.0.5: Very slow response to 'show' CLIs when SFP/QSFPs are present
934044 - N2048 - 6.2.1.6: Switch crashes or hangs after multiple SSH session retries on switch
926091 - N40xxF - 6.2.0.5: Customer has stack and when issuing 'show' CLI causing his ping to timeout
924613 - N2048P - 6.2.0.5: CDC RX FIFO entry 45 ECC error seen
922438 - N-Series - 6.2.0.5/6.2.1.4: 'show port-security dynamic ' show learned even with no sec
921371 - N2048P - 6.1.2.4/6.2.0.5: Aastra 6725IP phone not getting power when connected to switch
920799 - N-Series - 6.1/6.2 - Ports flapping when port-channel membership is being modified via WebUI
891874 - N2048 - 6.1.2.4: Switch not sending snmp trap notification for UP/DOWN status on loopback interfaces
881612 - N2048 - 6.1.2.4: web timeout (HTTPS) does not depend on exce-timeout configuration
944153 - N4064F 6.2.1.6 : switch stack takes a very long time to respond for any sh commands
943187 - N4064F :6.2.1.6: stack of 2, stop processing incoming CPU packets when show tech-support
944106 - N3048 - 6.2.1.6 Banner is not displayed in running configuration after a reboot
자세히 보기

버전

6.2.6.6, A08

출시일

08 9월 2015

다운로드 유형

펌웨어

범주

네트워크

중요도

권장
Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
사용 가능한 형식 중요 정보 보기

파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: N4000v6.2.6.6a08.zip
파일 크기: 24.36 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
a8cc1e8e7d2009b7b450fd573a5aadb1
SHA1:
a5d4a98c62c8eabbd2f1460aa99f2aa9ad23adea
SHA-256:
fe800864040ffe71dcdbd9042585215ecef9856e4b82f47619183ed8e07160d1

파일 형식: 편리한 수정 및 개선 사항 정보를 담은 텍스트 파일
파일 이름: N4000ReadMev6.2.6.6a08.txt
파일 크기: 3.14 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 표준 텍스트 편집기를 사용하여 볼 수 있는 일반 텍스트를 포함합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
4430ec610dda0598ae04b68b6f5b4894
SHA1:
76b3ae5bf443d824af65f223187e9920db95a004
SHA-256:
3eac8df272a363c9918957a171854cc1476a18c239c0b212bf7c7595fe14ab68

다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.

기타 세부 정보

모두 표시 | 모두 숨기기
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.2.6_Release_Notes"
Dell N4032
Dell N4032F
Dell N4064
Dell N4064F
(1) Download the zip file - N4000v6.2.6.6a08.zip
(2) Extract the image file "N4000v6.2.6.6.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N4000 Series Switches From Version 6.x.x.x to 6.2.6.6 Firmware.pdf" extracted from zip file.

네트워크 연결 문제와 관련하여 도움이 필요하십니까?

Dell의 네트워크 문제 해결 가이드에서 해결 방법 찾기

드라이버 도움말 및 자습서