Dell Device Managers for EMC Visual SAN, v.4.0, A01
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Dell(TM) Device Managers is a plug-in for EMC(R) VisualSAN(R) 3.0.0, 3.0.0 SP1 and 4.0.0
This provides enhanced device support and integrates EMC VisualSAN management functionality with Dell hardware and software. Enhanced functionality for Dell devices includes the following features:
- Device Discovery for NAS and all Supported Dell PowerVault Tape devices
- Device Discovery for Cluster Node (For EMC VisualSAN 3.x only)
- Trap Handling and Reformatting
- Extended Device Properties and Dell Specific Attributes
- Enhanced System Status Reporting
This provides enhanced device support and integrates EMC VisualSAN management functionality with Dell hardware and software. Enhanced functionality for Dell devices includes the following features:
- Device Discovery for NAS and all Supported Dell PowerVault Tape devices
- Device Discovery for Cluster Node (For EMC VisualSAN 3.x only)
- Trap Handling and Reformatting
- Extended Device Properties and Dell Specific Attributes
- Enhanced System Status Reporting
권장 사항
자동 스캔을 사용하려면 관리자 권한으로 Windows에 로그인하십시오. 관리자 권한으로 이미 로그인한 상태에서 이 메시지가 표시되었다면 재부팅하시기 바랍니다. 시스템이 IT 관리자에 의해 관리되고 있으며, 기능이 제한될 수 있습니다.
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Dell Device Managers Version 4.0 for EMC VisualSAN 3.0.0, 3.0.0 SP1 and 4.0.0
자세히 보기버전
4.0, A01
출시일
19 3월 2004
다운로드 유형
애플리케이션
범주
SAN 소프트웨어
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
사용 가능한 형식
파일 형식: ZipPack 외장형
파일 이름: R74063.EXE
파일 크기: 3.36 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
지원되는 운영 체제
Windows Server 2003
Windows 2000
Windows XP
설치 방법
Custom Instructions for R74063.EXE:
Overview
Dell™ Device Managers installation uses a self-extracting exe from which you will run setup.exe. This document provides instructions for downloading the file and installing the program.
--------------------------------------------------------------------------------
Download
1. Go to www.dell.com/emc/visualsan and click the link Download the Dell Device Managers Plug-In for EMC VisualSAN now.
2. Click the R74063.exe link.
3. When prompted, click Download Now.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
5. When the File Download window appears, click Save or Save this program to disk and click OK.
6. When the Save In window appears, select Desktop from the Save In drop-down menu to download the file to your desktop.
7. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
--------------------------------------------------------------------------------
Installation
1. Double-click the R74063.exe file on the desktop.
2. When the Self-Extracting window appears and prompts you to extract the file to c:\dell\drivers\R74063, write down the name of the path to where the file is extracted so that you can find the setup.exe file later.
3. Click OK.
4. After completing the file extraction, if the Self-Extractor window is still open, close it.
5. Click the Start button and then click Run.
6. Enter c:\dell\drivers\R74063 in the Open text box and then click OK.
7. When the Welcome screen appears, click OK to display the license agreement screen.
8. Read the license agreement, using the scroll bar or key to navigate and read the rest of the agreement, and click Yes to accept the agreement.
A message warns to close VisualSAN windows before proceeding with the installation.
9. Close any open VisualSAN windows, and then click OK to continue the installation
A screen appears providing two options: Management Station and Managed Node. You can find more information about the selected option on the top of the screen by clicking the Management Station option or the Managed Node option.
You can also view the release notes or installation guide by clicking the appropriate buttons. You can choose Cancel at any time to exit the installation.
10. Continue the installation. See "Management Station" or "Managed Node" for more information.
Management Station
-------------------------
1. During setup, choose Management Station and click Next to install the program on the EMC® VisualSAN® management station.
During the dependency check, if all the dependencies are met, a green check appears next to the component in the component list. If a red mark appears next to the component, follow the instructions in the result window to obtain more information about the failure and take necessary action before continuing with installation.
If necessary, click Back and take the necessary steps to satisfy all the dependencies and restart the installation.
2. Click Next to continue.
The installation result window displays messages if the installation was successful or if it failed.
Managed Node
------------------
Managed Node software components are only required to be installed on a host in the following scenarios:
Managed Node is zoned to a PowerVault 120T tape autoloader or PowerVault 130T tape library.
Managed Node is a cluster node (For EMC VisualSAN 3.x support only; not required for EMC VisualSAN 4.0.0).
Managed Node is zoned to a PowerVault 650F disk processor enclosure (DPE).
Managed Node has a QLA2200 host bus adapter (HBA).
Read the description for each component below to determine if you need to install that component on the managed node.
Components:
Cluster SNMP Agent (For EMC VisualSAN 3.x support only. Not required for EMC VisualSAN 4.0.0)
The Dell OpenManage Clust
Overview
Dell™ Device Managers installation uses a self-extracting exe from which you will run setup.exe. This document provides instructions for downloading the file and installing the program.
--------------------------------------------------------------------------------
Download
1. Go to www.dell.com/emc/visualsan and click the link Download the Dell Device Managers Plug-In for EMC VisualSAN now.
2. Click the R74063.exe link.
3. When prompted, click Download Now.
4. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
5. When the File Download window appears, click Save or Save this program to disk and click OK.
6. When the Save In window appears, select Desktop from the Save In drop-down menu to download the file to your desktop.
7. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
--------------------------------------------------------------------------------
Installation
1. Double-click the R74063.exe file on the desktop.
2. When the Self-Extracting window appears and prompts you to extract the file to c:\dell\drivers\R74063, write down the name of the path to where the file is extracted so that you can find the setup.exe file later.
3. Click OK.
4. After completing the file extraction, if the Self-Extractor window is still open, close it.
5. Click the Start button and then click Run.
6. Enter c:\dell\drivers\R74063 in the Open text box and then click OK.
7. When the Welcome screen appears, click OK to display the license agreement screen.
8. Read the license agreement, using the scroll bar or
A message warns to close VisualSAN windows before proceeding with the installation.
9. Close any open VisualSAN windows, and then click OK to continue the installation
A screen appears providing two options: Management Station and Managed Node. You can find more information about the selected option on the top of the screen by clicking the Management Station option or the Managed Node option.
You can also view the release notes or installation guide by clicking the appropriate buttons. You can choose Cancel at any time to exit the installation.
10. Continue the installation. See "Management Station" or "Managed Node" for more information.
Management Station
-------------------------
1. During setup, choose Management Station and click Next to install the program on the EMC® VisualSAN® management station.
During the dependency check, if all the dependencies are met, a green check appears next to the component in the component list. If a red mark appears next to the component, follow the instructions in the result window to obtain more information about the failure and take necessary action before continuing with installation.
If necessary, click Back and take the necessary steps to satisfy all the dependencies and restart the installation.
2. Click Next to continue.
The installation result window displays messages if the installation was successful or if it failed.
Managed Node
------------------
Managed Node software components are only required to be installed on a host in the following scenarios:
Managed Node is zoned to a PowerVault 120T tape autoloader or PowerVault 130T tape library.
Managed Node is a cluster node (For EMC VisualSAN 3.x support only; not required for EMC VisualSAN 4.0.0).
Managed Node is zoned to a PowerVault 650F disk processor enclosure (DPE).
Managed Node has a QLA2200 host bus adapter (HBA).
Read the description for each component below to determine if you need to install that component on the managed node.
Components:
Cluster SNMP Agent (For EMC VisualSAN 3.x support only. Not required for EMC VisualSAN 4.0.0)
The Dell OpenManage Clust