Bestanden downloaden
Bestandsindeling: Dit bestand bevat een gecomprimeerde (of gezipte) set van bestanden. Download het bestand naar een map op uw vaste schijf en voer het vervolgens uit (dubbelklik erop) om de set van bestanden uit te pakken. Volg de instructies om de installatie te voltooien.
Bestandsnaam: S2500_Dell_AAA_Win9xNT_Drivers_en.exe
Bestandsgrootte: 12.3 MB
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5: fadc8a807598c585caa3714a4f6a9fb0
Probleemoplossingen en verbeteringen
Remove USB support for Window 98 driver
Ondersteunde besturingssystemen
Windows Millennium Edition (Me)
Windows NT 4.0
Installatie-instructies
Custom Instructions for S2500_Dell_AAA_Win9xNT_Drivers_en.exe:
*** 9X/ME LPT Installation ***
1. Unzip the downloaded file to a directory on your computer
2. Open up the Add Printer Wizard (Start >
Settings > Printers and Faxes > Add Printer)
3. For the Add Printer Wizard, Select "Local Printer", "LPT port".
4. Click the "Have Disk" button and browse to the directory where the drivers has been downloaded.
5. Follow through the rest of the screens to complete the installation.
*** NT Network Installation ***
Note: Since NT does not support USB, you can only install the driver on a network.
1. The Microsoft TCP/IP Printing service must be installed. Skip to step 2 if this service is already installed. Otherwise follow steps A through F below.
To install MS TCP/IP Printing service:
A. Right Click on Network Neighborhood
B. Click "Properties"
C. Select the "Services" tab
D. Click "Add"
E. Select "Microsoft TCP/IP Printing"
F. Restart when prompted
2. Goto Start->Settings->Printers
3. Click the "Add Printer" icon
4. Select the "My Computer" radio button
5. Select "Add Port"
6. Select "LPR Port"
7. Enter the IP Address of the printer and a unique printer name
8. Click "OK" and then "Close"
9. Click "Next" and select "Have Disk"
10. Click "Browse" and search for the path your driver is located (i.e. C:\Dell\Printer\Drivers\Win_NT.40\DKAAGLDA.INF)
11. Click "Open"
12. Click "OK" and then "Next" until you reach the "Finish" screen
13. Click "Finish"