Ikke slå av datamaskinen eller koble fra strømkilden ved oppdatering av BIOS, da dette kan skade datamaskinen. Under oppdateringen starter datamaskinen på nytt, og en kort stund vil du se at skjermen er svart.

Før du oppdaterer, kan du lese installasjonsinstruksjonene og viktig informasjon som er angitt nedenfor.

Dell OptiPlex XE3 System BIOS

Omstart kreves Installert Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.
Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisories INTEL-SA-00295, INTEL-SA-00322, INTEL-SA-00320, and INTEL-SA-00329. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
Anbefalt

Sjekk kompatibilitet

Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemet

Skriv inn Dell-service-ID-en eller -modellen

Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan

Denne driveren er ikke kompatibel

Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.

Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.

Feilrettinger og forbedringer

Fixes:
- Firmware updates to address the Intel Security Advisory INTEL-SA-00295 (CVE-2020-0531, CVE-2020-0532, CVE-2020-0534, CVE-2020-0535, CVE-2020-0536, CVE-2020-0537, CVE-2020-0538, CVE-2020-0539, CVE-2020-0540, CVE-2020-0541, CVE-2020-0542, and CVE-2020-8674).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00322 (CVE-2020-0528 and CVE-2020-0529).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00320 (CVE-2020-0543).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00329 (CVE-2020-0548 and CVE-2020-0549).
- Fixed the issue where the hard drive master password reset does not function.
- Firmware updates to address CVE-2020-5362.
- Fixed the issue where the memory speed information that is displayed in the BIOS is incorrect.
- Fixed the issue where the BIOS update does not initiate when the monitor is disconnected from the system.
- Fixed the issue where some security settings in the BIOS setup are set to the default value. This issue occurs when the RTC reset is performed when there is an admin password.
- Fixed the issue where the Trusted Platform Module (TPM) not found error is displayed during the Power-On Self-Test (POST). This error is logged in BIOS event log.

Enhancements:
- Added an enhancement to extend the BIOS password configuration measurements into the Trusted Platform Module (TPM).
- Added new feature to automatically suspend BitLocker before upgrading the firmware. After the firmware upgrade is complete, BitLocker is automatically enabled.
- Improved the compatibility of PCIe USB cards.
Les mer

Versjon

1.7.1, 1.7.1

Utgivelsesdato

17 jul. 2020

Nedlastingstype

System-BIOS

Kategori

BIOS

Viktighet

Kritisk
Dell Technologies anbefaler på det sterkeste at du installerer denne oppdateringen så snart som mulig. Oppdateringen inneholder viktige feilrettinger og endringer for å forbedre funksjonaliteten, påliteligheten og stabiliteten til Dell-systemet ditt. Den kan også inkludere sikkerhetsreparasjoner og andre funksjonsforbedringer.
Tilgjengelige formater Se viktig informasjon:
Filformat: CPG BIOS-kjørbar fil for Windows/DOS
Filnavn: OptiPlex_XE3_1.7.1.exe
Filstørrelse: 22.72 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet består av en BIOS-kjørbar fil. Universalformatet (Windows / MS DOS) kan brukes til å installere fra et hvilket som helst Windows- eller MS DOS-miljø.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
be38b15cdfee3f610135c8ab0651fcec
SHA1:
9c7ee6d41600d81f168bcad8a3b95c08421aaca2
SHA-256:
8d62ed0d005b3589267cf366141825cae367bdb8bf8ef965b5bc2bf5b12815f4

Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)

Mer informasjon

Vis alle | Skjul alle
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Trenger du hjelp med BIOS-problemer?

Finn en løsning i Dells feilsøkingsveiledning for BIOS

Hjelp og veiledninger for drivere