Dell Networking PC8100, Firmware Version 6.1.1.7, A04
Omstart kreves Installert Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.1.1.7); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.1.1.7). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.1.1.7.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.1.1.7). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.1.1.7 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.1.1.7) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.1.1.7). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.1.1.7 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.1.1.7) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.1.1.7). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Anbefalt
Sjekk kompatibilitet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetSkriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
Fixes:
753276 When applying ACL to vlan interface PBR stops working
762345 N40xx v6.0.1.3 Random FAN and PMBUS errors
769220 igmp snooping/flooding implementation change
772696 Power negotiation fails with Cisco 9971 IP Phone
789841 QinQ does not work after reload of individual UNIT or Stack Reload or Stack UNIT reload
764268 emweb_main crashdump analysis required
780759 PC81XX N series , no way to enable IGMP globally from CLI, can only enable IGMP globally from GUI.
794305 N40xx v6.0.1.3 confirmation of traffic-shape minimum bandwidth
796923 6.0.1.3 - show ip igmp membership command shows incorrect messaging about "ip igmp" command
798430 Many customer complaints on N2000 fan noise
796256 N2048P --- Issues powering up POE devices on certain switch port interfaces.
792879 N2048P --- Issues powering up POE devices on certain switch port interfaces.
749031 Switch crashes intermittently with tArpCallback & IpHelperTask task related errors
804613 fw 6.1.0.1 - VLAN1 down after assigning static IP address
819033 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (kernel patch)
819034 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (u-boot patch)
810135 N3000/N2000 --- Stack's management IP can't be pinged after stack failover happened.
809376 6.1.0.1 - SNMP MIB for Power Supply and Fan Tray info of all units in the stack
819042 DVLAN: Port Channel member links are flapping up and down
815537 fix for OpenSSL SSLTLS MITM vulnerability CVE-2014-0224
819041 DUT crashes when the pbr with mac acl is applied on the vlan routing interface
819040 PBR : ACL associated to a VLAN interface's displays the message on the console "Access groups are not supported when configured on the same interface as a PBR route map"
816937 Hapi dvlan notification handler is trying to configure customer ports in legacy mode(this configuration is not supported)
819035 During initiate failover, Multicast traffic loss is seen for longer time and also few log messages are observed on console
812302 [N4000/N4064]Dell SFP GF76J is showing as N/A when we run show interface transceiver.
819043 Clone: PBR: IP Precedence is not working when we delete and re-configure route-map
816218 6.1.0.1 Continuous LACP flap on Force 10 device when used with N-series MLAG implementation.
820595 Seeing console hang on enabling "ip routing" with PBR rule and ACL rule applied on same Vlan interface.
819052 Traffic is forwording to a routing inteface even though PBR rule is not applied on that interface
280478 Observed dtl crash
812329 N2000 stack showing memory errors on members 8-11 when on version 6.1.0.1,
828011 When default route is present in camero the default nexthop option of PBR is failed
826341 6.1.0.6 - N-Series - Configured 10G ports return to default configuration after power on reboot.
Enhancements:
None
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes"
Les mer753276 When applying ACL to vlan interface PBR stops working
762345 N40xx v6.0.1.3 Random FAN and PMBUS errors
769220 igmp snooping/flooding implementation change
772696 Power negotiation fails with Cisco 9971 IP Phone
789841 QinQ does not work after reload of individual UNIT or Stack Reload or Stack UNIT reload
764268 emweb_main crashdump analysis required
780759 PC81XX N series , no way to enable IGMP globally from CLI, can only enable IGMP globally from GUI.
794305 N40xx v6.0.1.3 confirmation of traffic-shape minimum bandwidth
796923 6.0.1.3 - show ip igmp membership command shows incorrect messaging about "ip igmp" command
798430 Many customer complaints on N2000 fan noise
796256 N2048P --- Issues powering up POE devices on certain switch port interfaces.
792879 N2048P --- Issues powering up POE devices on certain switch port interfaces.
749031 Switch crashes intermittently with tArpCallback & IpHelperTask task related errors
804613 fw 6.1.0.1 - VLAN1 down after assigning static IP address
819033 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (kernel patch)
819034 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (u-boot patch)
810135 N3000/N2000 --- Stack's management IP can't be pinged after stack failover happened.
809376 6.1.0.1 - SNMP MIB for Power Supply and Fan Tray info of all units in the stack
819042 DVLAN: Port Channel member links are flapping up and down
815537 fix for OpenSSL SSLTLS MITM vulnerability CVE-2014-0224
819041 DUT crashes when the pbr with mac acl is applied on the vlan routing interface
819040 PBR : ACL associated to a VLAN interface's displays the message on the console "Access groups are not supported when configured on the same interface as a PBR route map"
816937 Hapi dvlan notification handler is trying to configure customer ports in legacy mode(this configuration is not supported)
819035 During initiate failover, Multicast traffic loss is seen for longer time and also few log messages are observed on console
812302 [N4000/N4064]Dell SFP GF76J is showing as N/A when we run show interface transceiver.
819043 Clone: PBR: IP Precedence is not working when we delete and re-configure route-map
816218 6.1.0.1 Continuous LACP flap on Force 10 device when used with N-series MLAG implementation.
820595 Seeing console hang on enabling "ip routing" with PBR rule and ACL rule applied on same Vlan interface.
819052 Traffic is forwording to a routing inteface even though PBR rule is not applied on that interface
280478 Observed dtl crash
812329 N2000 stack showing memory errors on members 8-11 when on version 6.1.0.1,
828011 When default route is present in camero the default nexthop option of PBR is failed
826341 6.1.0.6 - N-Series - Configured 10G ports return to default configuration after power on reboot.
Enhancements:
None
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes"
Versjon
6.1.1.7, A04
Utgivelsesdato
05 sep. 2014
Nedlastingstype
Operativsystemer
Kategori
Nettverk
Viktighet
AnbefaltDell Technologies anbefaler at du installerer denne oppdateringen ved neste planlagte oppdatering. Oppdateringen inneholder endringer for å opprettholde den generelle systemtilstanden. Det sikrer at systemprogramvaren forblir oppdatert og kompatibel med andre systemmoduler (fastvare, BIOS, drivere og programvare) og kan inkludere andre nye funksjoner.
Tilgjengelige formater Se viktig informasjon:
Filformat: Pakker ut filer direkte til lokal disk
Filnavn: PC8100v6.1.1.7a04.zip
Filstørrelse: 22.08 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet er et arkiv med filer som kan pakkes ut til en mappe på harddisken. Deretter installerer du fra den mappen.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
9caf5a8cf05d1fee22da590dec003884
SHA1:
17954bb40537554aa6ded79601fd88662e7b5ec6
SHA-256:
e668884f0d81234231d5fd7014c56d63161223fe07f0a2cae75d875b893da2bc
Filformat: En tekstfil med brukervennlig informasjon om feilrettinger og forbedringer
Filnavn: PC8100ReadMev6.1.1.7a04.txt
Filstørrelse: 3.2 KB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet inneholder ren tekst som kan vises med en vanlig tekstredigeringsprogram.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
aedce4f8cbe673b3ad501803d2eb6b0e
SHA1:
d3d35fccd2f45c1190943680eb2786a3aa37b1b7
SHA-256:
5130d1431427ddb410967dcfd9a896f037f836b66737fc4ee211058663a2f19c
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Viktig informasjon
Fixes:
753276 When applying ACL to vlan interface PBR stops working
762345 N40xx v6.0.1.3 Random FAN and PMBUS errors
769220 igmp snooping/flooding implementation change
772696 Power negotiation fails with Cisco 9971 IP Phone
789841 QinQ does not work after reload of individual UNIT or Stack Reload or Stack UNIT reload
764268 emweb_main crashdump analysis required
780759 PC81XX N series , no way to enable IGMP globally from CLI, can only enable IGMP globally from GUI.
794305 N40xx v6.0.1.3 confirmation of traffic-shape minimum bandwidth
796923 6.0.1.3 - show ip igmp membership command shows incorrect messaging about "ip igmp" command
798430 Many customer complaints on N2000 fan noise
796256 N2048P --- Issues powering up POE devices on certain switch port interfaces.
792879 N2048P --- Issues powering up POE devices on certain switch port interfaces.
749031 Switch crashes intermittently with tArpCallback & IpHelperTask task related errors
804613 fw 6.1.0.1 - VLAN1 down after assigning static IP address
819033 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (kernel patch)
819034 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (u-boot patch)
810135 N3000/N2000 --- Stack's management IP can't be pinged after stack failover happened.
809376 6.1.0.1 - SNMP MIB for Power Supply and Fan Tray info of all units in the stack
819042 DVLAN: Port Channel member links are flapping up and down
815537 fix for OpenSSL SSLTLS MITM vulnerability CVE-2014-0224
819041 DUT crashes when the pbr with mac acl is applied on the vlan routing interface
819040 PBR : ACL associated to a VLAN interface's displays the message on the console "Access groups are not supported when configured on the same interface as a PBR route map"
816937 Hapi dvlan notification handler is trying to configure customer ports in legacy mode(this configuration is not supported)
819035 During initiate failover, Multicast traffic loss is seen for longer time and also few log messages are observed on console
812302 [N4000/N4064]Dell SFP GF76J is showing as N/A when we run show interface transceiver.
819043 Clone: PBR: IP Precedence is not working when we delete and re-configure route-map
819052 Traffic is forwording to a routing inteface even though PBR rule is not applied on that interface
816218 6.1.0.1 Continuous LACP flap on Force 10 device when used with N-series MLAG implementation
820595 Seeing console hang on enabling "ip routing" with PBR rule and ACL rule applied on same Vlan interface.
280478 Observed dtl crash
812329 N2000 stack showing memory errors on members 8-11 when on version 6.1.0.1,
828011 When default route is present in camero the default nexthop option of PBR is failed
826341 6.1.0.6 - N-Series - Configured 10G ports return to default configuration after power on reboot.
Enhancements:
None
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes"
753276 When applying ACL to vlan interface PBR stops working
762345 N40xx v6.0.1.3 Random FAN and PMBUS errors
769220 igmp snooping/flooding implementation change
772696 Power negotiation fails with Cisco 9971 IP Phone
789841 QinQ does not work after reload of individual UNIT or Stack Reload or Stack UNIT reload
764268 emweb_main crashdump analysis required
780759 PC81XX N series , no way to enable IGMP globally from CLI, can only enable IGMP globally from GUI.
794305 N40xx v6.0.1.3 confirmation of traffic-shape minimum bandwidth
796923 6.0.1.3 - show ip igmp membership command shows incorrect messaging about "ip igmp" command
798430 Many customer complaints on N2000 fan noise
796256 N2048P --- Issues powering up POE devices on certain switch port interfaces.
792879 N2048P --- Issues powering up POE devices on certain switch port interfaces.
749031 Switch crashes intermittently with tArpCallback & IpHelperTask task related errors
804613 fw 6.1.0.1 - VLAN1 down after assigning static IP address
819033 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (kernel patch)
819034 Helix4 Field Alert: GS_REFCLK Input termination is not enabled (u-boot patch)
810135 N3000/N2000 --- Stack's management IP can't be pinged after stack failover happened.
809376 6.1.0.1 - SNMP MIB for Power Supply and Fan Tray info of all units in the stack
819042 DVLAN: Port Channel member links are flapping up and down
815537 fix for OpenSSL SSLTLS MITM vulnerability CVE-2014-0224
819041 DUT crashes when the pbr with mac acl is applied on the vlan routing interface
819040 PBR : ACL associated to a VLAN interface's displays the message on the console "Access groups are not supported when configured on the same interface as a PBR route map"
816937 Hapi dvlan notification handler is trying to configure customer ports in legacy mode(this configuration is not supported)
819035 During initiate failover, Multicast traffic loss is seen for longer time and also few log messages are observed on console
812302 [N4000/N4064]Dell SFP GF76J is showing as N/A when we run show interface transceiver.
819043 Clone: PBR: IP Precedence is not working when we delete and re-configure route-map
819052 Traffic is forwording to a routing inteface even though PBR rule is not applied on that interface
816218 6.1.0.1 Continuous LACP flap on Force 10 device when used with N-series MLAG implementation
820595 Seeing console hang on enabling "ip routing" with PBR rule and ACL rule applied on same Vlan interface.
280478 Observed dtl crash
812329 N2000 stack showing memory errors on members 8-11 when on version 6.1.0.1,
828011 When default route is present in camero the default nexthop option of PBR is failed
826341 6.1.0.6 - N-Series - Configured 10G ports return to default configuration after power on reboot.
Enhancements:
None
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.1.7_Release_Notes"
Operativsystemer som støttes
Ikke tilgjengelig
Gjelder
PowerConnect 8132
PowerConnect 8132F
PowerConnect 8164
PowerConnect 8164F
Instruksjoner for installasjon
(1) Download the zip file - PC8100v6.1.1.7a04.zip
(2) Extract the image file "N4000v6.1.1.7.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.1.1.7 Firmware.pdf" extracted from zip file.
(2) Extract the image file "N4000v6.1.1.7.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.1.1.7 Firmware.pdf" extracted from zip file.
Trenger du hjelp med problemer med nettverkstilkoblingen?
Finn en løsning i Dells feilsøkingsveiledning for nettverkHjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring