Delta 1100W PSU (PN: Y26KX, PR21C, W12Y2) Firmware Package
Omstart kreves Installert Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
This package provides the new firmware for power supplier and is supported on Delta 1100W PSU (PN:Y26KX, PR21C, W12Y2).
Anbefalt
Sjekk kompatibilitet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetSkriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
[For Y26KX, PR21C, W12Y2]
Fix:
- Fix latched alert while doing rapid AC cycling
Enhancement:
- Improve LED behavior
- Improve Input status report
Les merFix:
- Fix latched alert while doing rapid AC cycling
Enhancement:
- Improve LED behavior
- Improve Input status report
Versjon
00.1D.7D, 00.1D.7D
Utgivelsesdato
24 mai 2017
Nedlastingstype
Fastvare
Kategori
Strøm
Viktighet
AnbefaltDell Technologies anbefaler at du installerer denne oppdateringen ved neste planlagte oppdatering. Oppdateringen inneholder endringer for å opprettholde den generelle systemtilstanden. Det sikrer at systemprogramvaren forblir oppdatert og kompatibel med andre systemmoduler (fastvare, BIOS, drivere og programvare) og kan inkludere andre nye funksjoner.
Tilgjengelige formater Se viktig informasjon:
Filformat: Oppdateringspakke for MS Windows 64-biters.
Filnavn: Power_Firmware_C4M76_WN64_00.1D.7D.EXE
Filstørrelse: 11.52 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker i opprinnelig Microsoft Windows 64-biters format ikke krever at Microsoft WOW64 må være installert på Microsoft Windows Server.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
81969a09abf4e601f5fdcd9d5010fc59
SHA1:
332a06edf6591a6be5ab670aea1874a78a07b9af
SHA-256:
be76a342c10431373b993a3d909967a8ad0ff6de4409a0c850513688a2094382
Filformat: En GnuPG-fil som inneholder en kryptografisk signatur
Filnavn: Power_Firmware_C4M76_LN_00.1D.7D.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
GnuPG-signaturen for Red Hat Linux-oppdateringspakken kan brukes til å godkjenne Dells identitet i den tilhørende Red Hat Linux-oppdateringspakken.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
d97bc8547fe19fc1629b9a31beae4bfd
SHA1:
57da69a620945dbfa23da7e63b5ba4b16cf1906f
SHA-256:
1bcf783c4f0b3874c326123cc26f1a6198e7512e09a01d2fba65d9a64d10295f
Filformat: Oppdateringspakke for MS Windows 32-biters
Filnavn: Power_Firmware_C4M76_WN32_00.1D.7D.EXE
Filstørrelse: 6.9 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker (DUP) i Microsoft Windows 32-bitersformat er utformet for å kjøre på Microsoft Windows 64-biters operativsystemer. Dells oppdateringspakker (DUP) i Microsoft Windows 64-bitersformat kan bare kjøre på Microsoft Windows 64-biters operativsystemer. Når du velger en enhetsdriveroppdatering, må du velge en som passer til operativsystemet.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
4dd056fd2328dff4fe6923b9a8aa8699
SHA1:
2cb8ab8fc66e68def51cc2215c66a093c17a22c5
SHA-256:
1b37fe6ce92762f9f834d55cb40f25c0d2e29d63ea4be01eeab3bbd5f4732264
Filformat: Oppdateringspakke for Red Hat Linux
Filnavn: Power_Firmware_C4M76_LN_00.1D.7D.BIN
Filstørrelse: 2.05 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dells oppdateringspakker for Linux kan brukes som frittstående programmer som sikrer at bestemte valideringskriterier er oppfylt, og deretter bruker en oppdatering.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Merk: Oppdateringspakker for Linux har åpen kildekode. Du finner mer informasjon i Dells oppdateringspakker for Viktig-filen i Linux.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
cfb86a7d1df492a862cbbe7c93adf9e5
SHA1:
4919cc96a40f23fe91f7ec4d225d3ee0e9dc55ab
SHA-256:
c6fb874cb4f27c41990b54c8ea1eecfda461cca1952abffbab7d7766a30b0343
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Viktig informasjon
IMPORTANT:
- After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
- After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
Operativsystemer som støttes
Ikke tilgjengelig
Gjelder
Delta 1100W PSU V2
PWR SPLY,1100W,RDNT,13G,DELTA,V3
Instruksjoner for installasjon
PSU FIRMWARE UPDATE INSTRUCTIONS:
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" file:
Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN" file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.
Hjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring