Ikke slå av datamaskinen eller koble fra strømkilden ved oppdatering av BIOS, da dette kan skade datamaskinen. Under oppdateringen starter datamaskinen på nytt, og en kort stund vil du se at skjermen er svart.
Før du oppdaterer, kan du lese installasjonsinstruksjonene og viktig informasjon som er angitt nedenfor.
Dell OptiPlex 7450 All-in-One System BIOS
Omstart kreves Installert Denne filen ble automatisk installert som en del av en nylig oppdatering. Hvis du opplever problemer, kan du laste ned og installere på nytt manuelt.Innholdet på denne siden kan ha blitt oversatt automatisk. Fyll ut skjemaet nederst på siden for å gi tilbakemelding.
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Technical Advisory INTEL-TA-00391 and Intel Security Advisories INTEL-SA-00358, INTEL-SA-00381, and INTEL-SA-00389. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
Anbefalt
Sjekk kompatibilitet
Angi produktdetaljer for å vise den nyeste driverinformasjonen for systemetSkriv inn Dell-service-ID-en eller -modellen
Ønsker du å finne produktet? Skriv inn en produktidentifikator. Vis meg hvordan
Denne driveren er ikke kompatibel
Denne driveren er ikke gjeldende for det valgte produktet. Velg et annet produkt for å angi produktopplysningene dine for denne driveren på nytt, eller gå til siden for produktstøtte for å vise alle drivere for et annet produkt.
Logg på Windows som administrator for å bruke automatisk skanning. Hvis du allerede er logget på som administrator og ser denne meldingen, må du starte maskinen på nytt. Systemet ditt blir administrert av IT-administratoren, og funksjonene kan være begrenset.
Finn flere oppdateringer. Bruk SupportAssist for å finne alle de nyeste driveroppdateringene for enheten din.
Feilrettinger og forbedringer
- Firmware updates to address the Intel Technical Advisory INTEL-TA-00391 (CVE-2020-8753, CVE-2020-8745, CVE-2020-8705, CVE-2020-8757, CVE-2020-8756, CVE-2020-8760, CVE-2020-8751, CVE-2020-8754, CVE-2020-8747, CVE-2020-8746, CVE-2020-8749, CVE-2020-8752, CVE-2020-12303, CVE-2020-12355, and CVE-2020-12356).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00358 (CVE-2020-0587, CVE-2020-0591, CVE-2020-0592, and CVE-2020-0593).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00381 (CVE-2020-8696 and CVE-2020-8698).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00389 (CVE-2020-8694 and CVE-2020-8695).
Les mer- Firmware updates to address the Intel Security Advisory INTEL-SA-00358 (CVE-2020-0587, CVE-2020-0591, CVE-2020-0592, and CVE-2020-0593).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00381 (CVE-2020-8696 and CVE-2020-8698).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00389 (CVE-2020-8694 and CVE-2020-8695).
Versjon
1.16.1, 1.16.1
Utgivelsesdato
21 jan. 2021
Nedlastingstype
System-BIOS
Kategori
BIOS
Viktighet
KritiskDell Technologies anbefaler på det sterkeste at du installerer denne oppdateringen så snart som mulig. Oppdateringen inneholder viktige feilrettinger og endringer for å forbedre funksjonaliteten, påliteligheten og stabiliteten til Dell-systemet ditt. Den kan også inkludere sikkerhetsreparasjoner og andre funksjonsforbedringer.
Tilgjengelige formater Se viktig informasjon:
Filformat: CPG BIOS-kjørbar fil for Windows/DOS
Filnavn: OptiPlex_7450_1.16.1.exe
Filstørrelse: 17.76 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet består av en BIOS-kjørbar fil. Universalformatet (Windows / MS DOS) kan brukes til å installere fra et hvilket som helst Windows- eller MS DOS-miljø.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
d631ef584d8dd4ddb0bd109a40c502b7
SHA1:
7faa3a1a4fcfaa50c6ddff9f4d7a0bd3620330b5
SHA-256:
b70642c8c09e03f20c11e8df28157c453589d665c5403eb684d79e3407d55474
Filformat: BIOS Recovery Image File
Filnavn: BIOS_IMG.rcv
Filstørrelse: 17.75 MB
Dette er en stor fil. Avhengig av tilkoblingshastigheten kan det ta litt tid å laste den ned.
Formatbeskrivelse:
Dette filformatet består av en BIOS-kjørbar fil. Denne filen brukes for Systemgjenoppretting BIOS-prosessen for å gjenopprette systemet fra en skadet BIOS.
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5:
19b082155069761a643de4eee3fda51a
SHA1:
1bb67d88e46468ff1faa6531130d1e0b45fed37c
SHA-256:
145723618e52d272bb3759bfa42a47586546742c3576781e888e627ebdee5a6c
Ved å laste ned godtar du vilkårene i lisensavtalen for Dell-programvare. (på engelsk)
Viktig informasjon
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Gjelder
Dell OptiPlex 7450 AIO
Instruksjoner for installasjon
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Trenger du hjelp med BIOS-problemer?
Finn en løsning i Dells feilsøkingsveiledning for BIOSHjelp og veiledninger for drivere
Hvis du vil ha flere nedlastinger, kan du gå til Drivere og nedlastinger. For å få hjelp til å bruke informasjonen på denne siden, kan du gå til Driverhjelp og opplæring