Dell Networking 8100, Firmware Version 6.1.2.4, A05
Omstart krevesDriver-ID : M8X4X
Viktighet : Anbefalt
Versjon : 6.1.2.4, A05 Nyeste versjon Anbefalt versjon Nyeste og anbefalt versjon
Utgivelsesdato : 14 nov. 2014
Nedlastingstype : Operativsystemer
Kategori : Nettverk
After upgrading Dell Networking PC8100 Series switches to firmware version 6.0.0.8 or later (6.1.2.4); the system model ID will show as "N4000" in CLI, Web UI and SNMP interfaces. Dell PowerConnect 8100 Series switches supports N4000 firmware versions 6.0.0.8 and later (6.1.2.4). Both Dell PowerConnect 8100 Series and Dell Networking N4000 Series switches shares the same firmware image version (for example., N4000v6.1.2.4.stk). Dell Networking PC8100 series switches can be stacked with Dell Networking N4000 series switches with the entire stack required to run 6.0.0.8 or later firmware (6.1.2.4). Dell Networking PC8100 series switches can support both 5.x and 6.x firmware versions, but Dell Networking N4000 can support only 6.0.0.8 and later firmware versions.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.2.4_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.1.2.4 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.1.2.4) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.1.2.4). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.1.2.4_Release_Notes".
Please follow software update instructions included in the zip file - "Upgrading Dell Networking PC8100 Series Switches From Version 5.x.x.x or 6.x.x.x to 6.1.2.4 Firmware.pdf".
Note: PowerConnect 8100 Series switches with B1 CPU Revision require firmware version 5.1.0.1 or later (6.1.2.4) and cannot be downgraded to earlier releases. If this unit is to be deployed as a member within a stack, the entire stack will be required to run 5.1.0.1 or later firmware (6.1.2.4). The improved CPU version XLP308H-B1 version is not compatible with firmware 5.0.x.x. The 'show version' CLI command in the 5.1.0.1 release has been improved to identify the CPU version of the switch.
Last ned filer
Filformat: Dette filformatet er et arkiv med filer som kan pakkes ut til en mappe på harddisken. Deretter installerer du fra den mappen.
Filnavn: PC8100v6.1.2.4a05.zip
Filstørrelse: 22.45 MB
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5: 1f50a099ad54f1f47e81402a309efd3b
SHA1: 020b5aa107bba381524de03d75edf6b5b5c24073
SHA-256: 90cc84aed17ddc529eb6b416874bb562020c7ce8db752b16b766e0f88208d63b
Filformat: Dette filformatet inneholder ren tekst som kan vises med en vanlig tekstredigeringsprogram.
Filnavn: PC8100ReadMev6.1.2.4a05.txt
Filstørrelse: 3.2 KB
Kontroller kontrollsumverdien for å sikre integriteten til nedlastingen.
MD5: fce162429a8a17e82d740585f619ada1
SHA1: f0df6017f4b37a2ddc815133a4bc60e5ead0dc05
SHA-256: a9c9e837e4f9e66ed3c58ab74c0db5ffc449b90eaacd88bb63f19b90bcaab7eb
Skriv inn en service-ID
Skriv inn den unike service-ID din for å sikre at de viste nedlastingene er spesifikke for enheten din.