Pliki do pobrania
Format pliku: Ten format pliku zawiera plik wykonywalny z systemem BIOS. Format uniwersalny (Windows/MS DOS) pozwala na przeprowadzenie instalacji z dowolnego systemu Windows lub środowiska MS DOS.
Nazwa pliku: E6430A15.exe
Rozmiar pliku: 8.6 MB
Aby zapewnić poprawne pobranie pliku, sprawdź sumę kontrolną.
MD5: b0de9713c7daef28eda877f77bff9a40
SHA1: d9b03af519a2ad90adb2a389d6865edaf844fed8
SHA-256: 640fd7611448f0b044557f686abd0fea78360b2e312d72df94e520d035aa8669
Poprawki i usprawnienia
Fixes
- Addressed no external DVI display during POST when docked.
Enhancements
- Updated to 1.5.50 version of the Intel LOM PXE firmware.
Obsługiwane systemy operacyjne
Instrukcje dotyczące instalacji
BIOS Update Executable for Windows/DOS
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option"
3. Change UEFI to Legacy of Boot List Option
4. Click "Apply", "Exit" to save changes and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot .
8. Go to BIOS Setup by pressing F2 and go to General > Boot Sequence > Boot List Option"
9. Change "Legacy to UEFI Boot Option.
10. Click "Apply", "Exit" to save changes and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.
Reboot will be required
Dotyczy
Dell Latitude E6430 (ATG)