Pliki do pobrania
Format pliku: Ten format pliku zawiera plik wykonywalny z systemem BIOS. Format uniwersalny (Windows/MS DOS) pozwala na przeprowadzenie instalacji z dowolnego systemu Windows lub środowiska MS DOS.
Nazwa pliku: Embedded_Box_PC_5000_1.5.5.exe
Rozmiar pliku: 8.78 MB
Aby zapewnić poprawne pobranie pliku, sprawdź sumę kontrolną.
MD5: adb27da041a4f4309db63d1075693c72
SHA1: 0475c2cebf7d706de9a558ba9521e74bc683af40
SHA-256: 23e626a138803a26d3da745e167f9a1a639a8ff5c1276d34b907f9540a2de299
Poprawki i usprawnienia
Enhancements
1. Added TPM PPI Bypass for Clear Command support
2. Update Intel ME Firmware to address security advisories INTEL-SA-00125 (CVE-2018-3655) & Intel-SA-00131 (CVE-2018-3643 CVE-2018-3644)
3. Update to Intel Rapid Storage Technology OROM & UEFI version 15.9.1.3271.
4. Fixes an issue where system might hangs at password prompt
5. Improve link training process of PCI-e 2.5GT/s add-on card
Ważne informacje
User should update BIOS from 1.4.2 or previous version to 1.5.0 first, then update
from 1.5.0 to 1.5.5. If user update BIOS to 1.5.5 directly without update 1.5.0,
the system may not reboot unless user has to un-plug AC power cord once.
The 1.5.0 is a transitional BIOS, It's used for update to 1.5.5. Not recommend used
1.5.0 for other purpose and not recommend downgrade to 1.5.0 from any version.
Obsługiwane systemy operacyjne
Instrukcje dotyczące instalacji
Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
Dotyczy
Dell Embedded Box PC 5000 System BIOS