Fazer download dos arquivos
Formato do arquivo: Este formato de arquivo consiste em um arquivo executável do BIOS. O formato Universal (Windows/MS DOS) pode ser usado para instalação de qualquer ambiente Windows ou MS DOS.
Nome do arquivo: 5480A07.EXE
Tamanho do arquivo: 4.72 MB
Para garantir a integridade do download, verifique o valor da soma de verificação.
MD5: 000487ed5b630a3ae62ee0c7d58bd88d
SHA1: 7a838d961c087faf0fe2b8d7343ae3f72207f838
SHA-256: 11fe8d83fa3e1f89818494cdf8da0ec3ad1e229ad413212ebc9aaf898b04342d
Correções e aprimoramentos
Fixes
-N/A
Enhancements
-Enhanced IPV4/IPV6 boot into server when system cold boot.
Informações importantes
N/A
Sistemas operacionais compatíveis
Instruções de instalação
BIOS Update Executable for Windows/DOS
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.