Dell Networking Série N2000, firmware versão 6.2.1.6, A06
Reinicialização necessáriaInstaladoEste arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Este arquivo foi instalado automaticamente como parte de uma atualização recente. Se você estiver enfrentando algum problema, poderá fazer download e reinstalar manualmente.
Both Dell Networking N2000 and N3000 Series switches share the same firmware image file (N3000_N2000v6.2.1.6.stk). If your N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware 6.2.1.6 as it contains multiple bug fixes.
After upgrading the switch firmware version to 6.2.1.6, the boot code update is required on N2000 series switches via serial console if switch is running with the older boot code version. The latest boot code version available for N2000 series switches is “U-Boot SPL 2012.10-00078-g24e99ea (Jun 24 2014 - 16:41:18)"
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.1.6_Release_Notes".
Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.1.6 Firmware"
Recomendado
Verificar compatibilidade
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistema
Digite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto.Mostre-me como
Nenhum resultado encontrado. Não foi possível encontrar resultados para a sua pesquisa. Modifique sua pesquisa para inserir uma etiqueta de serviço (B959FS3) ou um modelo (Latitude 5540) e tente novamente.
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema.O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Correções e aprimoramentos
New Features & Enhancements: -Added Port-Security Sticky-MAC feature -Added support configuration of AdvLinkMTU, and included option MTU in Router Advertisement Message -Kernel updates and SSL version upgrade to 1.0.1.m
Fixes: Case ID Summary 865050 - N2048P v6.1.2.4 VoIP phones assigned to wrong VLAN since the stack was upgraded to v6.1.1.7 878235 - Routing issue, null address in ARP table after VLAN manipulation 881612 - N2048 - 6.1.2.4: web timeout (HTTPS) does not depend on exce-timeout configuration 883154 - N2048P - 6.1.2.4: Stack master unit crashing issuing some 'show' CLIs 886897 - N30XX v6.1.2.4 Ports on VLAN with PVST/R-PVST disabled not learning MAC addresses after reboot 890563 - ARP resolution not happening for iSCSI traffic when iSCSI optimization is enabled 891874 - N2048 - 6.1.2.4: Switch not sending snmp trap notification for UP/DOWN status on loopback interfaces 890635 - N-Series - 6.1.2.4 - SNMP MIB Walk OID "1.3.6.1.4.1.674.10895.3000.1.2.100" returns URL http://0.0.0.0 896750 - N-Series - 6.1.2.4 - IPv6 connectivity failure after stack member failure on N4064F stack with Fluid FS 897308 - N-Series Port-Security VoIP/PC issue 903943 - N-Series - 6.2.0.5 - N3000 - Receive and transmit packets dropped > MTU counters increasing 907269 - N-Series - 6.2.0.5 - Add 1G SFP (PN# FTRJ1319P1BTL) transceiver support 813685 - UNH - IPv6 - N3000 - USGv6 Interoperability and Basic Conformance failures 873414 - UNH : Unconfigurations of MTU values using the command "no system jumbo mtu" does not take effect in the DUT, after the DUT is configured with some random mtu value in the range of 1298-9216. 913069 - UNH : OSPF neighbourship not coming up on the dauntless after stack initiate failover, with MTU configured as 1298 and OSPF interface configured with ignore-mtu. 913071 - UNH : No ICMPv6 Too Big message sent on the interface, when the packet arrived on an interfaces that has less MTU configured. 913074 - UNH : DUT must drop the packet that has multicast address whose scop field contains the reserved value 0 as per RFC4291,section 2.7(page 14), but the ipv6 mrouter table has the learned-entry. 913068 - UNH : DUT should forward the packet that has multicast address whose scop field contains the reserved value "F" as per RFC4291 of section 2.7(page 14), but the first ICMPv6 echo request packet is getting dropped 913078 - UNH : In USGv6 Basic Conformance, the tests failed showing the reason "The device under test does not generate an ICMPv6 Parameter Problem messages in response to invalid packets". 913077 - UNH : In USGv6 Basic Conformance, the tests failed showing the reason "The device under test does not generate an Echo Reply to packets containing Pad1 or PadN options.". 913072 - UNH : DUT has problem in configuring and propagating IPv6 parameter as per the "v6LC.2.2.7c" test mentioned in the UNH defect 901088 - Connection fd is corrupt sometimes in bgp neighbor connection list 913061 - Flash format optionis missing on N4000 Series Bootmenu. 906510 - Route loop in leaf-spine topology after bringing down the link between Leaf-1 and spine-2 913067 - 6.2: Allow period '.' in configuration of the hostname 876886 - N4064F - 6.1.2.4: ARP entries with 0000.0000.0000 mac-address 883154 - N2048P - 6.1.2.4: Stack master unit crashing issuing some 'show' CLIs 839620 - N4032F Static IP Routing Issue. 921285 - DFE should to be turned on for 10Gb copper ports on N4000 Series. 921287 - Hotswapping different modules on N4000 Series causes the switch to crash. 921322 - OSAPI semaphores don't work when two tasks are waiting on the same semaphore. 922468 - After save and reload sticky mode functionality is not properly working. 907697 - N20xx dot1x mac based authentication,clients behind phones can't forward traffic 920185 - N3000-6.2-Front 10G ports goes down when 10G SFP extension module is removed from the slot
A Dell Technologies recomenda aplicar esta atualização durante o próximo ciclo de atualização programado. A atualização contém alterações para manter a integridade geral do sistema. Ela garante que os softwares do sistema fiquem atualizados e compatíveis com outros módulos do sistema (firmware, BIOS, drivers e software) e pode incluir outros recursos novos.
Formato do arquivo:Extrai arquivos diretamente no disco local
Nome do arquivo:N2000v6.2.1.6a06.zip
Tamanho do arquivo:22.97 MB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este formato de arquivo consiste em um conjunto de arquivos que podem ser descompactados para um diretório no disco rígido. A instalação pode ser feita por esse diretório.
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.1.6_Release_Notes"
(1) Download the zip file - N2000v6.2.1.6a06.zip (2) Extract the image file "N3000_N2000v6.2.1.6.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.1.6 Firmware.pdf" extracted from zip file.
Reboot will be required
Precisa de ajuda com problemas de conexões de rede?
Encontre uma solução no guia de solução de problemas de rede da Dell