Seagate ST9160412AS/ST9250410AS/ST9320423AS/ST9500420AS Firmware Update

Custom Instructions for R250679.EXE: * PLEASE PRINT THE FOLLOWING INSTRUCTIONS * For Bootable CD option (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250679.EXE) file and select ""RUN"" then ""RUN"" again. 2. Press ""Continue"" then ""OK"" to extract the files to the provided location. 3. If you have CD imaging software that supports the .ISO image format the file ""C:\DELL\Drivers\R250679\Seagate Utility.ISO"" is an image for a bootable CD that will automatically run the application. 4. Boot to the CD. 5. The Seagate utility will start automatically. 6. The utility will auto scan and update the appropriate Seagate ST9160412AS, ST9250410AS, ST9320423AS, ST9500420AS. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the CD and power off your PC. 9. Power on your PC to continue normal operation. For Other Bootable option (IE. USB key, etc.)(PLEASE MAKE SUREA/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250679.EXE) file and select ""RUN"" then ""RUN"" again. 2. Press ""Continue"" then ""OK"" to extract the files to the provided location. 3. The files are located in ""C:\DELL\Drivers\R250679\Files"" directory. 4. Add the files to your bootable media and run the ""FLASH.bat"". 5. The Seagate utility will start automatically. 6. The utility will auto scan and update the appropriate Seagate ST9160412AS, ST9250410AS, ST9320423AS, ST9500420AS. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the Bootable Media and power off your system.