Fazer download dos arquivos
Formato do arquivo: Este arquivo contém um conjunto compactado (ou zipado) de arquivos. Faça download do arquivo em uma pasta no disco rígido e, em seguida, execute-o (dê dois cliques) para descompactar o conjunto de arquivos. Siga as instruções para concluir a instalação.
Nome do arquivo: DELL_CONTROLVAULT-WINDOWS-BI_A00_R308326.exe
Tamanho do arquivo: 22.05 MB
Correções e aprimoramentos
Sistemas operacionais compatíveis
Instruções de instalação
Custom Instructions for DELL_CONTROLVAULT-WINDOWS-BI_A00_R308326.exe Installation order is very important – use the following procedure, including reboots or the software will not function properly: 1. Download the following software packages and install in the order listed below: a. Dell Data Protection | Access | Drivers Package i. Double click package filename and select Custom installation Setup Type ii. Uncheck the Dell ControlVault box iii. Continue to follow the wizard installation instructions until completed b. Dell ControlVault Windows Biometric Framework Driver package i. Double click package filename and follow the wizard installation instructions ii. Go to the "C:\dell\drivers\R308326\USH64" folder and double click on CVHCI64.msi and follow the wizard installation instructions until completed iii. Reboot c. Dell ControlVault Firmware i. Double click package filename and follow the wizard installation instructions ii. Go to "C:\dell\drivers\R308326" firmware folder and double click on ushupgrade.exe and follow the wizard installation instructions iii. In the pop up dialog window press the Start button iv. When installation is completed press the Restart button. The system will reboot 2. Enable ControlVault Windows Biometric Framework feature (Start->All Programs->Broadcom->USH Tools and click on ControlVault WBF a. In pop up dialog window select Enable and the press the Set button b. Press the Exit button c. Allow time for any windows updates to complete Errata Data: Windows Update may sometimes conflict with the installation of the Dell ControlVault Windows Biometric Framework driver installation and not allow proper installation. To identify if this occurs, go to Device Manager (Start->My Computer->Properties->Device Manager) and click on "Biometric Devices" and notice if there is a yellow exclamation mark (yellow bang) on the "ControlVault w/Fingerprint swipe sensor". If this is so, right click on "ControlVault w/Fingerprint swipe sensor" and select Update Driver and choose "Browse my computer for driver software. Wait until Driver has been detected and installed (30 secs).