Veritas Backup Exec, v.B90DV04_254337, A01

Default Instructions for B90DV04_254337.exe:

NOTE:
This driver set is built for Backup Exec for NetWare version 9.0.
This driver set has not been tested with with earlier versions of Backup
Exec for NetWare.

If you are using Backup Exec for NetWare version 9.0.4019 you must
download and upgrade to the latest version of Backup Exec for NetWare
v9.0 before applying this driver set.

Download
1. Click Download Now, to download the file.

2. At the Export Compliance Disclaimer window, click Yes, I Accept
this Agreement.

3. When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.

4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.

5. If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

Install
1. Double click B90DV03_254337.exe to extract it's contents to a
temporary directory.

2. Shut down Backup Exec by typing BESTOP at the command prompt on
the NetWare server.

3. Map a drive to the NetWare server from the Windows client from
which you have extracted the contents of B90DV03_254337.exe.

4. Copy the files from the temporary directory on the Windows client
to the SYS:\BKUPEXEC\NLMS directory on your NetWare server.

5. Start Backup Exec by typing BESTART at the command prompt on the
NetWare server.