Veritas Backup Exec, v.9.0.4175, A01

Custom Instructions for B90PEN_254334.exe:

This upgrade will bring your installtation of Veritas Backup Exec
v9.0 for Novell Netware to build 4175.

Note: The following assumes that Backup Exec v9.0 is installed
on your system and the tape devices are attached and powered on.

Installing the upgrade.

1) Stop the Backup Exec services by typing "BESTOP" at the command
prompt on the Novell server where Backup Exec v9.0 is installed.

2) Map a drive to the Novell server (where Bacup Exec v9.0 is installed)
from the Windows server where you downloaded the upgrade.

3) Download B90PEN_254334.EXE from a Windows based server that
manages the Backup Exec Netware server.

4) Double click the self extracting executable to extract the contents to
a temporary directory on the local machine.

5) Go to the temporary directory and double-click on setup.exe.

6) The installation wizard will begin. Follow the prompts to install the
upgrade.

7) Start the Backup Exec services by typing "BESTART" at the command
prompt on the Novell server.